the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5706v w/o remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
alanlagerquist 
Member - Posts: 6
Member spacespace
Joined: December 15, 2014
Posted: December 16, 2014 at 11:14 PM / IP Logged  
This is my first time installing an alarm. i need to know what wires need connected without using the remote start?
alanlagerquist 
Member - Posts: 6
Member spacespace
Joined: December 15, 2014
Posted: December 16, 2014 at 11:15 PM / IP Logged  
its a viper 5706v and its going in a 1993 dodge w 250
freqsounds 
Copper - Posts: 289
Copper spacespace
Joined: October 17, 2008
Location: Virginia, United States
Posted: December 19, 2014 at 7:05 PM / IP Logged  
Should be power, door locks, door triggers, hood pin, and trunk.
No question is stupid or not worth asking. You were once a noob, right? :)
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 19, 2014 at 8:52 PM / IP Logged  
you wasted money if you purchased a 5706, and only plan to use the alarm functions. I would just end up connecting a few more wires and have both work.
alarm only = lock/unlock, all door triggers, hood, rear gate, siren, led
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
alanlagerquist 
Member - Posts: 6
Member spacespace
Joined: December 15, 2014
Posted: December 21, 2014 at 11:30 AM / IP Logged  
Thanks for the replies i got 5706 for the extended 2 range remotes. where I'm running into my problem is the starer cut off and think i need to use the green and violet wires from the remote start plug. but I've also heard that i need to connect the RED / black and the red wires from the remote start plug too. but I'm not sure.
freqsounds 
Copper - Posts: 289
Copper spacespace
Joined: October 17, 2008
Location: Virginia, United States
Posted: December 22, 2014 at 12:04 PM / IP Logged  
You'll need the green and violet wires if you plan on doing a starter cutout, but you shouldn't need the other heavy gauge wires if you're not doing the remote start feature.
No question is stupid or not worth asking. You were once a noob, right? :)
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 22, 2014 at 12:26 PM / IP Logged  
You'll also need to connect the pink wire to an ignition source.
Though you can use a thinner gauge wire if not using the R/Start.
alanlagerquist 
Member - Posts: 6
Member spacespace
Joined: December 15, 2014
Posted: January 04, 2015 at 4:49 PM / IP Logged  
so I've got it in and every thing works except the starter cut off. i used the violet and green wire and I've tried connecting and the power inputs. nothing. anyone got something for me to try?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 04, 2015 at 5:16 PM / IP Logged  
Which way round and to what did you connect the green an violet, also did you connect the pink ignition as I told you to do?
freqsounds 
Copper - Posts: 289
Copper spacespace
Joined: October 17, 2008
Location: Virginia, United States
Posted: January 04, 2015 at 6:21 PM / IP Logged  
Viper systems work a little different from others. The only time the starter is cut out is when the system is armed. If you sit in the truck, arm the system and give it 30 seconds to fully engage. Then try to start the truck with the key. The starter should not turn, and if the pink wire is connected, the alarm should go off.
If the alarm triggers but the truck starts, you have a problem with the green and violet wires.
You have to cut the truck's starter wire in two to get this to work. The green wire should go to the starter wire coming from the ignition tumbler. The violet goes out to the starter.
If the alarm does not trigger, temporarily disconnect the pink wire and try the same test again (arm and try to start).
I haven't used the cutout in a while, so I can't remember if the pink will disarm the system when it gets power.
The pink will still need to be used so it will clear the alarm history and allow for programming.
No question is stupid or not worth asking. You were once a noob, right? :)
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer