dodge viper - wiring diagram

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|red & pink/black    |+  |ignition harness            ||          STARTER|yellow              |+  |ignition harness            ||         IGNITION|blue                |+  |ignition harness            ||        ACCESSORY|BLACK/ orange        |+  |ignition harness            || SECOND ACCESSORY|BLACK/ white         |+  |ignition harness            ||       POWER LOCK|WHITE/ green *1      |+  |lt blu plug,pin D14 @ EEM *2||     POWER UNLOCK|same wire           |   |                            ||       LOCK MOTOR|                    |   |                            ||     UNLOCK MOTOR|                    |   |                            ||    DISARM DEFEAT|                    |   |                            || PARKING LIGHTS +|BLACK / YELLOW *3     |   |grn plug, pin B @ EEM *2    ||       HEADLIGHTS|lt GREEN/ red        |+  |headlight switch            ||     DOOR TRIGGER|*4                  |-  |lt blue plug @ EEM *2       || DOME SUPERVISION|yellow              |-  |grn plug,pin 6,under fusebox||  TRUNK/HATCH PIN|gray/black(GTS only)|-  |lt blu plug,pin C14 @ EEM *2||         HOOD PIN|BROWN / tan           |-  |lt blu plug,pin C12 @ EEM *2||  FCTRY ALARM ARM|arms with lock *5   |   |                            ||FCTRY ALRM DISARM|lt GREEN/ orange     |+  |lt blu plug,pin C11 @ EEM *2||       TACHOMETER|gray/lt blue        |   |gry plug, pin 31 @ PCM *6   ||      SPEED SENSE|WHITE/ tan           |   |radio                       ||       BRAKE WIRE|white               |+  |brake pedal switch          ||     HORN TRIGGER|BLACK/ red           |-  |lt blu plug, pin C3 @ EEM *2||           WIPERS|brn/wht(L),RED / yel(H|-  |steering column             ||  LF WINDOW UP/DN|lt blue - white     |A  |switch on center console    ||  RF WINDOW UP/DN|brown - purple      |A  |switch on center console    ||        RADIO 12V|pink                |+  |radio                       ||     RADIO GROUND|black               |-  |radio                       ||     RADIO SWITCH|RED / white           |+  |radio                       || RADIO ILLUMINATE|BLACK / YELLOW        |+  |radio                       ||    POWER ANTENNA|GREEN/ red           |+  |radio                       ||       LF SPEAKER|lt grn/pu-lt grn/grn|   |power amplifier *7          ||       RF SPEAKER|lt blu/pu-lt blu/grn|   |power amplifier *7          ||       LR SPEAKER|wht/pur - wht/grn   |   |power amplifier *7          ||       RR SPEAKER|tan/pur - tan/grn   |   |power amplifier *7          |

Notes:

*1 Pulse the wire once will lock the doors and pulsing it again will unlock the doors. To OPEN the driver door pulse positive to pink/white in pin D11, in the lt blue plug of the EEM. To OPEN the passenger door pulse positive to ORANGE / white in pin D12.  *2 The EEM (Electronic Entry Module) is located on the driver side of the transmission tunnel.  *3 Also found tan at the headlight switch.  *4 The driver door trigger is BLACK/ lt blue in pin C15, and the passenger door trigger is tan/red in pin C16. Use both wires and diode isolate each.  *5 The factory alarm will arm with lock if it see the driver door open. Use the lock output to pulse the driver door trigger the same time as lock.  *6 The PCM (Powertrain Control Module) is on the driver fender under the power distribution center. The tach wire is also located behind the instrument cluster.  *7 The power amplifier is located on the driver side of the trunk.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA