the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

90 Integra, and Remote starter install


Post ReplyPost New Topic
< Prev Topic Next Topic >
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 9:47 AM / IP Logged  
Ok I received a remote starter for Christmas, just going to go install it. I have done remote starter installs before but here is my problem I am having. The remote starter i got only has 1 ignition line output. On my 90 Integra there is 2 ignition lines, one I think runs the car itself and the other runs the accessories in the car like the blower motor. How can i hook this starter up so it can run both the ignition lines?
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: December 29, 2004 at 10:57 AM / IP Logged  
relay it..   85 ground 86 +12v from the ignition1 output 30 +12v from 12volt source and 87a to ignition 2... should do the trick
-Mike
Driving a Bagged, Caddied 02 s10
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: December 29, 2004 at 11:35 AM / IP Logged  
sorry typo.. thanks for the catch bobk
Driving a Bagged, Caddied 02 s10
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 11:44 AM / IP Logged  
Ok so I hard wire the ignition like from the starter into the 1st ignition then from there take a jumper wire to 86 then ake another jumper wire and attach one end to 87 and the other end of that wire to ignition 2 correct?
meltingplastic 
Copper - Posts: 225
Copper spacespace
Joined: November 08, 2004
Location: United States
Posted: December 29, 2004 at 11:55 AM / IP Logged  
connect ignition1 like you normally would... then get a relay(those ones with the harness work great) and tap into the ignition 1 wire on the r/s harness with 86. ground out 85. then tap into the 12volt source you are using for the r/s and tap 30 into there. then take 87 and tap that into ignition 2 just as you did with ignition 1.
Driving a Bagged, Caddied 02 s10
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 1:22 PM / IP Logged  
Ok so basically what I said is correct then by reading what meltingplastic just put.
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 3:09 PM / IP Logged  
Ok yea, I fogot to mention the ground and the R/S ignition....
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 4:48 PM / IP Logged  
Ok I did exactly what Meltingplastic said to do with the relay and now under normal starting with key the car will not start, but when i remove the relay it does.
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 5:33 PM / IP Logged  
Nope I just spliced in,
Kwalsh24 
Member - Posts: 22
Member spacespace
Joined: December 29, 2004
Location: Canada
Posted: December 29, 2004 at 5:49 PM / IP Logged  
I have a stack of them here,
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer