the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Valet 561, 32 degrees incomplete remostart


Post ReplyPost New Topic
< Prev Topic Next Topic >
philsan12 
Member - Posts: 20
Member spacespace
Joined: December 08, 2005
Location: United States
Posted: December 20, 2006 at 5:06 PM / IP Logged  
Unit works fine untill cold weather. Now when the nights are below freezing,activating the remote turns the starter but the engine doesn't catch.
Have in default Tach Checking type, engine checking on,
crank time .6 sec.
Should I just increase the crank time increments?
phil
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: December 20, 2006 at 6:25 PM / IP Logged  
If you have it set to tach sensing, the crank time has no effect. The crank time setting is only used when it is set to voltage sensing.
You can either:
Change it to voltage sensing, and then try different crank times.
or
Leave it on tach sensing, but try relearning tach with the RPMs at a higher level. I would try around 1500 RPMs. Start car...tep on gas slightly to raise RPMs, press and release programming button.
It would also help if you listed what you have for a car, and what you used for a tach wire.
chris354 
Silver - Posts: 253
Silver spacespace
Joined: February 19, 2005
Location: United States
Posted: December 20, 2006 at 7:05 PM / IP Logged  
What year make and model car.
philsan12 
Member - Posts: 20
Member spacespace
Joined: December 08, 2005
Location: United States
Posted: December 20, 2006 at 7:15 PM / IP Logged  
honda crv EX 2002 Blue grey Tach wire under hood by ecm.
phil
chris354 
Silver - Posts: 253
Silver spacespace
Joined: February 19, 2005
Location: United States
Posted: December 20, 2006 at 7:33 PM / IP Logged  
According to my notes the tach wire is at the test connector by the battery should be blue wire.
snotdobbs 
Copper - Posts: 148
Copper spacespace
Joined: September 11, 2003
Location: United States
Posted: December 20, 2006 at 9:12 PM / IP Logged  
the test connector should definetly be there in a 2002.........cold weather where i am and it always works fine.....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer