clueless on box size

Home / the12volt's Install Bay / Car Audio / clueless on box size (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

arnshrty

Member - Posts: 22

Joined: November 21, 2008

Location: Texas, United States

Posted: November 05, 2009 at 3:42 PM / IP Logged

I am needing a box volume for a sealed box and a ported box with port size. The sub is a 8" Dayton RSS210HF-4 and the specs are as follows:

Le (mH) @ 1kHz: 0.68

Fs (Hz): 28.3

Qms: 3.08

Qes: 0.68

Qts: 0.50

Mms (g): 66.02

Cms (mm/M): 0.48

Sd (cm2): 219.0

Vd (liters): 197.1

BL (Tm): 7.76

Vas (liters): 32.4

Xmax (mm): 9

VC Diameter (mm): 51

Usable Frequency (Hz): 27-1000

I've got access to several and would like to put them to good use.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 05, 2009 at 4:00 PM / IP Logged

For sealed, try about 32.5 litres (1.1 cuft) and for vented try about 65.8 litres (2.3 cuft) ported @ 23Hz (2" diameter round port 5.5" long)

Support the12volt.com

Back to Top

arnshrty

Member - Posts: 22

Joined: November 21, 2008

Location: Texas, United States

Posted: November 05, 2009 at 4:17 PM / IP Logged

wow thanks for such quick response....i'm in the "toying" stage so I am open for all suggestions as far as for sq, spl, and so on. They are the High Fidelity series, not the High Output series, so yes I know I would probably be better of going sq with them

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clueless on box size

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.