Stereo Wiring for 04 VW Touareg

Home / the12volt's Install Bay / Car Audio / Stereo Wiring for 04 VW Touareg (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 17, 2011 at 10:04 PM / IP Logged

on a 2004 vw touareg non navi

iam upgrading to aftermarket hu and amp

Would any one know the turn on lead color and looking for the wiring diag on the amp also

thanks

get your grind on

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 17, 2011 at 10:20 PM / IP Logged

http://metraonline.com/part/70-9003

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 18, 2011 at 5:01 AM / IP Logged

thanks i have that connector and now any help in the amp set up. car has 1o speakers thinking of using one or 2 4 ch amps

get your grind on

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: February 20, 2011 at 9:42 AM / IP Logged

Factory amp wiring...

LF- If equipped, the amplifier is in the right rear quarter panel. On vehicles with amplifier the low range wires are red - BROWN / red at the amplifier, 23 pin plug, pins 3 and 2, or 24 pin plug, pins 9 and 8. The mid range wires are red - BROWN / red at the amplifier, 23 pin plug, pins 6 and 9, or pins 3 and 2. The high range wires are red - BROWN / red at the amplfier, 23 pin plug, pins 5 and 8, or pins 9 and 6.

RF- If equipped, the amplifier is in the right rear quarter panel. On vehicles with amplifier the low range wires are red - BROWN / red at the amplifier, 23 pin plug, pins 11 and 12. The mid range wires are red - BROWN / red at the amplifier, 23 pin plug, pins 18 and 15, or 24 pin plug, pins 12 and 11. The high range wires are red - BROWN / red at the amplfier, 23 pin plug, pins 14 and 17, or pins 18 and 15.

LR- If equipped, the amplifier is in the right rear quarter panel. On vehicles with amplifier the low range wires are blue - BROWN / blue at the amplifier, 24 pin plug, pins 4 and 10. The high range wires are blue - BROWN / blue at the amplifier, 24 pin plug, pins 1 and 7.

RR- If equipped, the amplifier is in the right rear quarter panel. On vehicles with amplifier the low range wires are blue - BROWN / blue at the amplifier, 24 pin plug, pins 3 and 2. The high range wires are blue - BROWN / blue at the amplifier, 24 pin plug, pins 6 and 5.

Center channel- gray - BROWN / gray, amplifier, 24 pin plug, pins 12 and 11

Mike M2

Tech Manager

CS Dealer Services

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 20, 2011 at 10:47 AM / IP Logged

should i wire it to a one 4 channel or two 4 channel amps.

to get all all speaker was going to use 10 and not the center channel.

thanks

get your grind on

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: February 20, 2011 at 11:17 AM / IP Logged

Are you replacing the factory speakers? If so then you should use one amplifier channel per speaker. If you are trying to use the factory speakers, then power the factory amp.

Support the12volt.com

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: February 20, 2011 at 2:38 PM / IP Logged

Yea, not much to gain if you aren't replacing it all. Chances are the factory amp/speakers are gonna sound better anyway. If it was mine i would leave it alone and maybe just add a subwoofer/amp...

Mike M2

Tech Manager

CS Dealer Services

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 20, 2011 at 5:42 PM / IP Logged

for now i am keeping the factory speakers and there is a problem with the factory amp.thats way i am replacing it with a low power amp. the oem head unit non navi is time for a upgrade. to 7inch dvd.

i dont even see how the panels come out to get to the oem amp anyway.

get your grind on

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 20, 2011 at 5:45 PM / IP Logged

the set up is a female cousin and she is not into the bass killer sound. but wants the screen and ipod setup.

but the oem amp is a problem

get your grind on

xllsc

Member - Posts: 18

Joined: February 05, 2006

Location: United States

Posted: February 20, 2011 at 5:49 PM / IP Logged

is it true the mids and highs are 4 ohm and the low speakers are 2ohm?

so i really cant wire all the speakers in one door with out dropping the ohms to 1ohm

get your grind on

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.