does anyone own a Pioneer GMX424 Amp?

Home / the12volt's Install Bay / Car Audio / does anyone own a Pioneer GMX424 Amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jjl2191

Member - Posts: 13

Joined: April 14, 2004

Location: New Zealand

Posted: April 15, 2004 at 2:54 AM / IP Logged

i've got a problem with this amp. the power indicator keeps blinking and there's no sound. does anyone know why?

jj

Back to Top

dustin_parks79

Member - Posts: 35

Joined: April 12, 2004

Location: United States

Posted: April 15, 2004 at 3:44 AM / IP Logged

have you checked your, RCA cable's and RCA out puts on the back of your unit? "Reciver"? cause i was having the same prob. with a system the otherday. and that is what it turned out to be after playing with it all day trying and trying to figure it out, and returning items back to the store!

just somthing you can check out!

Back to Top

Search for other posts by dustin_parks79

jjl2191

Member - Posts: 13

Joined: April 14, 2004

Location: New Zealand

Posted: April 15, 2004 at 4:08 AM / IP Logged

i did check RCA cables and output. the cables is brand new and the output seemed working when i connected to my home stereo. someone has suggested it indicates protection mode. is it possible?dont know much about this. nothing in the manual either.

jj

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: April 15, 2004 at 4:18 AM / IP Logged

just because the RCA's are brand new doesn't suggest they work properly have you tried several other sets?

Quad L Handyman services

Back to Top

jjl2191

Member - Posts: 13

Joined: April 14, 2004

Location: New Zealand

Posted: April 15, 2004 at 4:22 AM / IP Logged

i actually connected my car headunit to the home stereo with the same RCA cable. worked fine. does anyone own a Pioneer GMX424 Amp? -- posted image.

jj

Back to Top

robbie2883

Copper - Posts: 104

Joined: August 20, 2003

Location: United States

Posted: April 15, 2004 at 10:26 AM / IP Logged

unhook the RAC's and speaker outputs from the amp so that just the power ground and remote are hooked to the amp and try to power it up. if it powers up the turn off and plug in RCA's and power up again. next the speaker wires. if any of these send it into protection then you've found your problem.

if its jammed force it - if it breaks in the process it needed to be fixed anyway

Back to Top

jjl2191

Member - Posts: 13

Joined: April 14, 2004

Location: New Zealand

Posted: April 15, 2004 at 4:50 PM / IP Logged

i've tried that. still blinks. u think the problem is major? what do u think might have caused this problem? coz when i tested it an hour ago it was fine but soon as i hooked it to my car it went dead. i'm pretty sure i didn't do anything stupid. all the wiring was done according to the manual. have u got a same amp?

jj

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

does anyone own a Pioneer GMX424 Amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.