Power wire and 4ch amp?

Home / the12volt's Install Bay / Car Audio / Power wire and 4ch amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rt2party

Member - Posts: 41

Joined: December 14, 2004

Location: United States

Posted: December 20, 2004 at 11:58 AM / IP Logged

how do i run a power wire in a CC truck for a 4ch. amp withotu running it next to the speaker cables for the 4 speakers? my plan is to run a 4Ga. power wire to a dist. block w/ 2 8Ga. power wires to my 4ch and sub amp. but i do not know how to run the power wire to the midle or back of th truck without it being next to the speaker wires at some point? anyone wanna share how they ran thers? thanks! ~Ryan

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 20, 2004 at 12:48 PM / IP Logged

First, what the hell is a CC truck? Second it isn't speaker wires you have to worry about, it is rcas.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: December 20, 2004 at 1:44 PM / IP Logged

Just run the 4 gage wire down one side and the rca's for the 2 amps down the other side. Yeah, what is a CC truck? By the way, get a high quality set of rca's from the start. Cheap rca's cause lots of problems.

'85 Toy

Back to Top

rt2party

Member - Posts: 41

Joined: December 14, 2004

Location: United States

Posted: December 20, 2004 at 4:01 PM / IP Logged

sorry, CC = Club Cab, it means there is a back area (back seat is an overstatement) but plenty of room for big speakers.thanks for the help. i will be installing this system in a 99' Dodge Dakota R/T (5.9L engine!). i will be posting some pics of the custom box i am doing for the sub/subamp in the fiberglass forum after x-mas (AKA: when my poor ass can afford to build it) thanks for your help. ~Ryan

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Power wire and 4ch amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.