frequency questions

Alright I have a alpine 4channel pushing my interiors (fronts are 3way 4x6s doors are 4way 6.5s) would running 100 to the doors and 150-175 to the dash be a resonable sound? I am in the proccess of gettin a sub in but I just want to know if this would still sound clean. I thought it wouldnt be a problem... a buddy of mine who does installs recommended stayin at like 200 ... i'm currently runnin 150 to the doors and 200 to the dash) oh they are running about 50rms any help would be appreciatedRusty Spring

98 s10 reg cab

Type R 12 Inverted between seats

Type R 6.5 for doors

Type S 5.25 on the dash

Alpine MRD-M605 mono

Alpine MRV-F345 4ch

The 4X6 won't handle that kind of power.  Do it right the first time

question was about frequency are you sayin they wont handle the frequency or the power... cuz 50w rms is a no prob for themRusty Spring

98 s10 reg cab

Type R 12 Inverted between seats

Type R 6.5 for doors

Type S 5.25 on the dash

Alpine MRD-M605 mono

Alpine MRV-F345 4ch

Your best is to try different frequencies. There is no absolute in setting x-over frequencies. Try different frequencies for front and rear too. You will have the best luck with your sub installed that way you can blend it better based on the subs x-over point as well.