1 ohm stable amp

I'm trying to find a good 1 ohm stable amp for under $350 for a friend of mine.  the amp needs to be able to push three sony xplode 10's rated for 300 watts rms a piece ran in parallel at 1.34 ohms.  the sub a 4 ohm single voice coil.  he doesn't need them to be super spl, cause there going in the back of his camaro, but they do need to be pushed pretty good.Don't Ask Questions When You Already Know The Answer!!!

You can gennerally find the Kicker kx1200.1 on ebay for around that price....that would be a very good amp for them2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

mcintosh ,  does 1400watts allday long at 1 ohm  may be able to get one  ??MECP installer,technician

i would go with the kx1200.1, it's a good strong, durable amptex

I believe some of the older US amps were one ohm stable.

I got a Phoenix Gold, Xenon series amp, which creates same output through any impedance load 1 through 4. the mono amps are available in 400 600 or 1200 watts for very good prices, check them out. Also obviously the JL amps 500 and 1000/1 have came down in price alot. $350 for one amp that is 1 ohm stable is going to be pretty easy find nowadays, technology is getting cheaper by the day, and more and more 1 ohm stable amps are appearing. Good luck with the search.99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

Since when is it possible to run ONE mono amplifier to THREE subs at one ohm stable? How is it even possible to run three speakers period to a mono amp? I can see two speakers, but three?

willdkartunes wrote: Since when is it possible to run ONE mono amplifier to THREE subs at one ohm stable? How is it even possible to run three speakers period to a mono amp? I can see two speakers, but three?

Like this;

Remeber you present a load that is higher than one ohm to a one ohm stable amp, like 1.5 ohms or 1.7. So it is very possible

Thank you very much for clarifying that, dwarren and boardinbum!