start kill for ground starter

Home / the12volt's Install Bay / Motorcycle Electronics / start kill for ground starter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: March 26, 2006 at 3:29 PM / IP Logged

im installing a clifford gp500 with a built in start kill that requires +12 im assuming to trip the interal relay but the motorcycle has a ground pluse that trips the oem starter relay i know i can catch the output of the oem relay which is +12 and break that line but that wire is 8awg and the oem relay is 15amp fused so how can i interrupt the neg that trips the factory relay and if i cant come up with some ingenious relay trick will the internal clifford be able to had the current flow

Back to Top

xscash

Copper - Posts: 317

Joined: March 05, 2006

Location: United States

Posted: March 26, 2006 at 4:22 PM / IP Logged

cut the neg starter wire conect it to 30 and 87a......86 to ign 85 to alarm

XS

expandable sound

south of boston

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

start kill for ground starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.