door locks and tachless

trying to hook up my doors for a mazda 2004 rx8 and have a couple questions

1. I hooked up my door looks as instructed. Have negative pules (1k resistor for lock) when i hit my button on my remote the horn honks 1s for lock and twice for unlock however the never actually lock or unlock the door.

2. I want to run tachless however i am unsure how to do this. (rather run a tach wire if someone knows where exactly this wire is.

2004 Mazda rx8 and Python 100xp.

Try using a relay for the locks.

Will the python do tachless?

im almost positive i have the right wire because if i ground that wire the doors unlock. but when i hook up the relays, it does the horn hooking thing.

Yes that alarm has tachless.

Your horn honks....and you don't have any connection to your horn?  Where did you get the lock wire?

Testing by grounding a wire is not really the way to do it.  Get a DMM and turn the key in the door.

How do you have your relays wired up?

using the 451m

purple is gounded

brown and white or cut (UNUSED)

BLUE - to light green wire unlock

other wire believe its green has a resister to it and is spliced into the BLUE wire.  lock

plugged into alarm brain of 1400 xp python

negative locks

thanks