directfax 1081

Hey guys i need a little help. Can someone post a copy of 1081 for me? Than ks....Mike M2

Tech Manager

CS Dealer Services

Thanks! Unfortunately it doesn't solve my problem tho. I need to disarm the factory alarm and not unlock all the doors for two stage unlock. I can deal with the unlock and locking during RS i guess. I'm thinking of removing the factory unlock relays and make a harness that will plug spade terminals into the factory socket. I can then have the unlock relays outside the relay panel, allowing me to interupt them during factory disarm and solving my problem. Think it will work? The only other thing i can think of is tracing the motor legs when they leave the panel and interupt them there with separate relays...Mike M2

Tech Manager

CS Dealer Services

This is why i like Avox, they have an actual pulse before start. My DEI doesn't and that's going to add another relay to this. I'm going to interrupt both unlock motor legs(drivers door and all other doors) with relays and drive them with the factory disarm wire on my AM7. This should allow the factory alarm to disarm(thru the WHITE/ green and a 665 resistor). The problem is that wire also pulses if you disarm the DEI(stupid idea from DEI) so i'll have to use a 3rd relay to interrupt the factory disarm wire on the AM7when i hit disarm. Gonna try in the morning, as long as the unlock pulse and the factory disarm pulse are the same length of time it should work....Mike M2

Tech Manager

CS Dealer Services