trunk release

Home / the12volt's Install Bay / Car Security and Convenience / trunk release (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kero_1116

Member - Posts: 13

Joined: March 22, 2009

Posted: May 17, 2009 at 1:10 AM / IP Logged

I have a 94' Integra with a Compustar Pro P1WSH-A (brain model is CM4300). I am trying to install a trunk release with a trunk release kit I bought in eBay.

Here's how I connect the relay:

Alarm's accessary (-) output (Connection 4 wire #2) ----> Pin #85

+12V -----------------------------> Pin #86 and #87

Positive Wire from Solenoid ------> Pin #30

Manual of the alarm is:

http://www.compustar.com/dsupport/manuals/pro_install_manuals/CBM-1_InstallManual_V1.0.pdf

However it doesn't work.

I tried to test if the alarm is outputting a ground using a multimeter and I think it doesn't output any ground when I press and hold the trunk button for 2 seconds.

Anyone know what seems to be the problem? How do I test if the alarm is providing a negative output when I press the trunk key.

Thanks!

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 17, 2009 at 5:51 AM / IP Logged

Set DMM to 20volt DC setting, place red probe on a constant 12volts, place black probe to suspected aux output wires of alarm and press relevant button remote. Your relay is wired correctly but fuse 86 and 87 to 15amps. Make sure solenoid is properly grounded. N.B. If you've wired the front end correctly, you should hear the relay click.

Back to Top

kero_1116

Member - Posts: 13

Joined: March 22, 2009

Posted: May 17, 2009 at 9:40 PM / IP Logged

Found out what was wrong. I have to close the trunk first for it to work!!!

Many hours wasted because of it.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 18, 2009 at 2:11 AM / IP Logged

Don't worry, we've all been there, more credit to you for admitting it!

Back to Top

kero_1116

Member - Posts: 13

Joined: March 22, 2009

Posted: May 18, 2009 at 9:12 AM / IP Logged

lol yeah

I hope someone doesn't do the same mistake as me.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk release

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.