python 990

Home / the12volt's Install Bay / Car Security and Convenience / python 990 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

vjw757

Member - Posts: 15

Joined: May 24, 2009

Posted: May 24, 2009 at 11:28 AM / IP Logged

Im trying to install a Python 990.

Right now im stuck on the door triggers.

on the 1992 camaro Z28, Does it have:

[A] Three wire +12v Pulse

Three wire - ground pulse
[C] Directly wired reversing polarity

Once i find out what door lock system i have then ill need to connect the
451M Door lock relay module for python security systems

Can anyone help out with this?

Back to Top

t&t tech
Platinum - Posts: 2,608

Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: May 24, 2009 at 11:43 AM / IP Logged
the wiring on this site says that they are positive trigger, in the driver kick panel, light blue and black.
commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

vjw757
Member - Posts: 15

Joined: May 24, 2009
Posted: May 24, 2009 at 12:48 PM / IP Logged
do you know what wires are going where . I did find this but havent troube figuring it out

http://akamaipix.crutchfield.com/Manuals/607/607451M.PDF

Back to Top

howie ll
Pot Metal - Posts: 16,466

Joined: January 09, 2007
Location: United Kingdom
Posted: May 24, 2009 at 2:37 PM / IP Logged
You shouldn't need the 451, just use blue for lock and green unlock assuming these wires give you both pos and neg outputs, also diode them with the bands away from the 990. Incidentally, your question is confusing. Door triggers switch on the courtesy lights, you must be posting a query on door lock triggers.

Back to Top

vjw757
Member - Posts: 15

Joined: May 24, 2009
Posted: May 24, 2009 at 2:40 PM / IP Logged

howie ll wrote:

You shouldn't need the 451, just use blue for lock and green unlock assuming these wires give you both pos and neg outputs, also diode them with the bands away from the 990. Incidentally, your question is confusing. Door triggers switch on the courtesy lights, you must be posting a query on door lock triggers.

my orginal post was about door triggers but im pass that. Now im on to the door locks.

Back to Top

vjw757
Member - Posts: 15

Joined: May 24, 2009
Posted: May 24, 2009 at 2:53 PM / IP Logged

howie ll wrote:

You shouldn't need the 451, just use blue for lock and green unlock assuming these wires give you both pos and neg outputs, also diode them with the bands away from the 990. Incidentally, your question is confusing. Door triggers switch on the courtesy lights, you must be posting a query on door lock triggers.

thanks howie. your were correct. i didnt need it. the locks are working perfectly now.

On to the remote start. this should be fun.

Back to Top

vjw757
Member - Posts: 15

Joined: May 24, 2009
Posted: May 24, 2009 at 4:21 PM / IP Logged
Now my problem now is the remote start. Ive got the starter, constant 12V, and the ignition wires hooked up. and it wont do anything, anyone got any clues?

Back to Top

howie ll
Pot Metal - Posts: 16,466

Joined: January 09, 2007
Location: United Kingdom
Posted: May 24, 2009 at 4:52 PM / IP Logged
What's actually happening? Please describe, for instance is it turning over but not firing? Have you programmed tach?

Back to Top

howie ll
Pot Metal - Posts: 16,466

Joined: January 09, 2007
Location: United Kingdom
Posted: May 24, 2009 at 4:56 PM / IP Logged
You have to bypass the VATS system. Search this site for GM vehicles, same year.

Back to Top

vjw757
Member - Posts: 15

Joined: May 24, 2009
Posted: May 24, 2009 at 4:56 PM / IP Logged
its not doing anything. i read in the book about a remote start activation input wire and the main harness. i checked and that wire is not hooked up. the book doesnt say where to hook it up

Back to Top

Next Page >

Page of 2

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.