hooking up viper 5002 to locks

Hello, So I have a MES power lock kit that I installed. I have a Viper 5002 that I want to add to it. There is two wires that I guess control the lock and unlock on the MES kit. Brown is unlock and Purple is lock. The viper door wire harness looks like this -BLACK/ White: Dome light supervison input #87 -WHITE/ black: Lock #87a normally closed -GREEN/ black: Lock #30 common (output) -Violet/black: lock #87 normally open (input) -brownblack- unlock #87a normally closed -Blue/Black: Unlock #30 common (output) -Violet: Unlock #87 normally open (input) It says on the MES installation guide that if I want to add a different alarm/keyless entry that the wires MUST have a negative lock and unlock output pules or it will damage my MES system. So I was told to hook it up like this: Viper 5002 -> MES System WHITE/ Black & BROWN / Black - Not use GREEN/ Black - Purple(Lock) Blue/Black - Brown (unlock) Violet & Violet/Black - Ground I tried to lock it with the remote. It locked then unlocked. So I tried to lock it from the inside (lock/unlock swtich) and it would lock then unlock then the main relay for the MES system would make a buzzing sound. Anyone know what is wrong?

This is what the relay looks like and how it is wired. This is on a 2009 Toyota Yaris 2dr.

do you think my relay is blown or something? ever since I hooked it up to the viper it doesnt work the same. When the relay buzzes does that mean it is bad?

Whoa whoa whoa. So purple and PURPLE / black go to 12v consistant BROWN / black and BLACK/ white go to ground Ok I hooked up the purples to ground and didnt use the BROWN / black and WHITE/ black. Do you think I messed up my power locks hooking it up that way?

Yeah the power lock kit said that the alarm/keyless entry needs a negative lock and unlock output. It says that positive pulses will damage the power lock system. when I hook it up like you said. and I plug it in. It locks then unlock and keeps doing that nonstop. There is still a buzzing noise coming from the relay that wasnt there befor.

when you do it my way, you're not connecting the blue/black and the GREEN/ black to the module i hope, these two wires will now be connecting directly to the blue and green wires on the actuators no other wires will be involved here.

Oh wait, im confused. haha Ok so coming from the power lock actuator is a Purple(Lock) and Brown(unlock). So from the Viper 5002 door trigger harness is -BLACK/ White: Dome light supervison input #87 -WHITE/ black: Lock #87a normally closed -GREEN/ black: Lock #30 common (output) -Violet/black: lock #87 normally open (input) -brownblack- unlock #87a normally closed -Blue/Black: Unlock #30 common (output) -Violet: Unlock #87 normally open (input) You want me to hook it up like this? Viper 5002 -> MES power lock BLACK/ White - Not use WHITE/ black - Ground GREEN/ black - Purple (lock) Violet/black: 12v consant BROWN / black- Ground Blue/Black: Brown (unlock) Violet: 12v constant And you want me to hook it straight to the actuator before the relay? will that unlock the passenger side also? sorry im new to this