viper 5701 2 way remote
Home /
the12volt's Install Bay /
Car Security and Convenience / viper 5701 2 way remote (
Topic Closed)
Topic Closed)
Welcome Guest :)
Members
Search
Register
Login
Posted: January 21, 2010 at 8:04 PM / IP Logged
Just installed a 5701 in a 1996 nissan altima. The 1-Way works flawlessly. I am having error lights on the 2-way remote.
I verified all zones secure, and waited to post until today after I got new batteries for the remote.
I have deleted both remotes and reprogrammed them.
I disconnected the battery for a over 30 minutes. I have everything applicable hooked up except the tach wire which really doesn't have any bearing on this.
What happens is that the 2-way function RED LED goes off and the top AMBER LED flashes. No abnormailties from siren or antenna LED. Funny thing is that sometimes the 2-way beeps and sometimes it doesn't!
Is there any way to clear the remote memory? I tried shorting the battery contacts, but that didn't work.
How do you reset the brain?
Thanks in advance!!!
I've done mercedes (with those awesome vacuum locks!), volvo, bmw, etc. I thought Nissan was gonna be easy! This freaking little car required two isolation relays and then another relay for a trunk solenoid I decided to put in (this was DEI's fault though, solenoid should have a trigger). Time consuming, but easy enough, however, what made this install hellacious was disconnecting an unused 1996 keyless/alarm module. The single owner I bought from said it hadn't worked since the late 90's!. It had obviously been wired by a complete idiot. Well, after fixing all the connections and making sure the old alarm connections were properly terminated I'm quite disappointed with the outcome!
Posted: January 22, 2010 at 6:31 PM / IP Logged
{SPAN style="FONT-FAMILY: 'Franklin Gothic Medium','sans-serif'; mso-bidi-font-size: 11.0pt; mso-bidi-font-family: 'Arial'; mso-bidi-theme-font: minor-bidi"}
{p class=Msonormal}I don’t think it’s the low battery warning, these errors are different than what the manual states.{SPAN style="mso-spacerun: yes"} {/SPAN}I’ve had this installed since last weekend, so I’ve been able to fine tune and go over any of the obvious mistakes.{/P}
{p class=Msonormal}I really appreciate a quick response!{SPAN style="mso-spacerun: yes"} {/SPAN}I still have a navigation head unit and 2 pairs of component speakers to install and would love to have everything done by the end of this weekend. {/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"}{/SPAN} {/P}
{p class=Msonormal}{?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /}{o:p} {/o:p}{/P}
{p class=Msonormal}Here’s what I’ve done so far for troubleshooting:{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"}{/SPAN} {/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}1.{SPAN style="mso-spacerun: yes"} {/SPAN}{SPAN style="mso-spacerun: yes"} {/SPAN}I’ve deleted both remotes and reprogrammed them to the brain.{/P}
{p class=Msonormal}2.{SPAN style="mso-spacerun: yes"} {/SPAN}I’ve disconnected the car battery for over an hour.{/P}
{p class=Msonormal}3.{SPAN style="mso-spacerun: yes"} {/SPAN}I’ve verified inputs on every zone.{/P}
{p class=Msonormal}4.{SPAN style="mso-spacerun: yes"} {/SPAN}Took batteries out and put back in remotes.{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"}{/SPAN} {/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Is there a way to reset the memory on the remotes themselves?{SPAN style="mso-spacerun: yes"} {/SPAN}I tried shorting the positive & negative battery leads, but that didn’t work.{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"}{/SPAN} {/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Here is the list of everything I hooked up, I put a Y next to the wires I used and left blank the wires I didn’t hook up.{SPAN style="mso-spacerun: yes"} {/SPAN}I know how to wire the vehicle, it’s the control module I’m worried might need something put to ground, etc.{SPAN style="mso-spacerun: yes"} {/SPAN}BTW the car is a 1996 Nissan Altima GXE with no factory alarm.{SPAN style="mso-spacerun: yes"} {/SPAN}The door pin, trunk pin, hood pin, brake shutdown all work fine.{SPAN style="mso-spacerun: yes"} {/SPAN}The lock, unlock, sensor/siren and remote start all work fine.{SPAN style="mso-spacerun: yes"} {/SPAN}I read this is a common issue and some people have put a 10k resistor on the antenna wire and some people pulled the fuse from the brain.{SPAN style="mso-spacerun: yes"} {/SPAN}If either of these work, please let me know and let me know how to pull the brain’s fuse if that will work.{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Primary harness (H1), 12-pin connector{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/1 RED / WHITE (-) 200mA TRUNK RELEASE OUTPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/2 RED (+)12v CONSTANT INPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/3 BROWN (+) SIREN OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-tab-count: 1"} {/SPAN}H1/4 WHITE/ BROWN{SPAN style="mso-spacerun: yes"} {/SPAN}LIGHT FLASH ISOLATION WIRE {/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/5 BLACK (-) CHASSIS GROUND{/P}
{p class=Msonormal}{SPAN style="mso-tab-count: 1"} {/SPAN}H1/6 VIOLET (+) DOOR TRIGGER INPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/7 BLUE (-) TRUNK PIN/ INSTANT TRIGGER INPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/8 GREEN (-) DOOR TRIGGER INPUT{/P}
{p class=Msonormal}{SPAN style="mso-tab-count: 1"} {/SPAN}H1/9 BLACK/ WHITE (-) 200mA DOME LIGHT OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H1/10 WHITE/ BLUE (-) REMOTE START/TURBO TIMER{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H1/11 WHITE PARKING LIGHT OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H1/12 ORANGE (-) 500mA GROUND WHEN ARMED OUTPUT{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Auxiliary harness (H2), 8-pin connector (NO FACTORY ALARM){/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/1 LIGHT GREEN/ BLACK (-) 200mA FACTORY ALARM DISARM {/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/2 LIGHT GREEN / WHITE{SPAN style="mso-spacerun: yes"} {/SPAN}(-) 200mA FACTORY ALARM ARM {/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/3 WHITE/ VIOLET (-) 200mA AUX 1 OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/4 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/5 WHITE/ BLACK (-) 200mA AUX 3 OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/6 LIGHT BLUE (-) 200mA 2ND UNLOCK OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}H2/7 GRAY/BLACK (-) DIESEL WAIT TO START INPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}H2/8 BROWN / BLACK (-) 200mA HORN HONK OUTPUT{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Door lock harness, 3-pin connector{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}1 BLUE (+) LOCK (-) UNLOCK OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}2 EMPTY NOT USED{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}3 GREEN (-) LOCK (+) UNLOCK OUTPUT{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Heavy gauge remote start, (H3) 10-pin connector{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}1 PINK (+) IGNITION 1 INPUT/OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}2 RED / WHITE (30A) FUSED IGNITION 2 / FLEX RELAY INPUT 87{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}3 ORANGE ACCESSORY OUTPUT{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}4 VIOLET (+) STARTER OUTPUT (CAR SIDE STARTER KILL WIRE){/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}5 GREEN (+) STARTER INPUT (KEY SIDE STARTER KILL WIRE){/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}6 RED (+) FUSED (30A) IGNITION 1 INPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}8 PINK/BLACK FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}9 RED / BLACK FUSED (30A) ACCESSORY/STARTER INPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}10 N/C N/C{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Remote start input, 5-pin connector{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}1 BLACK/ WHITE (-) NEUTRAL SAFETY SWITCH INPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}2 VIOLET/WHITE TACHOMETER INPUT WIRE{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}3 BROWN (+) BRAKE SHUTDOWN WIRE{/P}
{p class=Msonormal}Y{SPAN style="mso-tab-count: 1"} {/SPAN}4 GRAY N/O or N/C (-) HOOD PIN SWITCH INPUT, ZONE 6{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}5 BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}Remote start auxiliary output, 5-pin{SPAN style="mso-spacerun: yes"} {/SPAN}(DIDN’T HOOK UP){/P}
{p class=Msonormal}{o:p} {/o:p}{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}1 PINK/WHITE (-) 200mA FLEX RELAY CONTROL OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}2 ORANGE (-) 200mA ACCESSORY OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}3 VIOLET (-) 200mA STARTER OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}4 PINK (-) 200mA IGNITION 1 OUTPUT{/P}
{p class=Msonormal}{SPAN style="mso-spacerun: yes"} {/SPAN}5 BLUE (-) 200mA STATUS OUTPUT{/P}
{p class=Msonormal}{/SPAN} {/P}{SPAN style="FONT-FAMILY: 'Franklin Gothic Medium','sans-serif'; mso-bidi-font-size: 11.0pt; mso-bidi-font-family: 'Arial'; mso-bidi-theme-font: minor-bidi"}{o:p}
{p class=Msonormal}{/o:p}{/SPAN}{SPAN style="FONT-SIZE: 110pt"}{"Arial"}{/SPAN}{/P}Please do not copy and paste from a rich text editor like Microsoft Word. Please copy and paste from a plain text editor like Notepad.
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
