remote start 2008 dodge ram

Home / the12volt's Install Bay / Car Security and Convenience / remote start 2008 dodge ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

harleyrob

Member - Posts: 17

Joined: May 01, 2007

Location: Utah, United States

Posted: March 01, 2010 at 3:07 PM / IP Logged

I put an Audiovox Pro 9776 in a 2008 Ddge Ram used a DEI CHALL module every thing works fine except initiate remote start the truck runs for 40 seconds and then shuts off,ANY IDEAS,PLEASE HELP!

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 01, 2010 at 4:37 PM / IP Logged

make sure its bypassed properly by leaving a key in the ignition in the off position.

also make sure you program the tach for the audiovox unit.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 02, 2010 at 1:07 PM / IP Logged

Are you using W2W or D2d for the bypass ? Also, you didn't mention if the truck was a diesel or gas ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

harleyrob

Member - Posts: 17

Joined: May 01, 2007

Location: Utah, United States

Posted: March 02, 2010 at 1:36 PM / IP Logged

using d2d diesel got it working thanks all for the help

Back to Top

bikewiz

Member - Posts: 3

Joined: May 21, 2003

Posted: October 10, 2010 at 11:51 PM / IP Logged

What wound up being your problem? I'm trying to find a solution to the CHALL not cranking my 2006 diesel with a python 991 connected w2w.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start 2008 dodge ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.