resistors

Home / the12volt's Install Bay / Car Security and Convenience / resistors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: September 10, 2010 at 4:55 AM / IP Logged

Going to install a remote start on a '04 Jeep Grand Cherokee. Its going to need a 1300 ohm resistor for the parking lights. I found some, but they come in 1/2 watt and 1/4 watt. Which ones do I get?

Also, it says for the disarm that it needs a 463 ohm resistor. I searched everywhere online and cant find any. Is there even such a thing?

Thanks.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 10, 2010 at 5:55 AM / IP Logged

1/2 or 1/4 watt will do. It is not that critical on the resistance. 470 ohm is a common and easily located value. It will work just fine.

Back to Top

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: September 10, 2010 at 2:48 PM / IP Logged

Thanks for the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

resistors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.