2000 camry base, avital 4103

I am going to be putting in an Avital 4103 remote start in a customer's 2000 Camry base model with no factory alarm or keyless entry soon and had a few questions. First will the Avital need a set of external relays for the door lock like a 451m ?? Also will I need a bypass for an immobilizer?? Key he is using appears to be a standard hardware store copy with bare metal head so I assume not but wanted to be sure before starting.

If it is an all metal key...NO bypass...The 4103 is a good unit...And the camry is VERY easy to do...The door locks should be negative and the wires from the remote start will hook up directly to the wires in the car...

	Trnk Release		BLUE/BLACK		(+)		IN HARNESS IN DRIVERS KICKPANEL
	Remote Start
	WIRE		COLOR		POLARITY		LOCATION
	Battery		WHITE		(+)		IGNITION SWITCH HARNESS
	Ignition 1		BLACK / YELLOW		(+)		IGNITION SWITCH HARNESS
	Ignition 2		BLACK/ RED		(+)		IGNITION SWITCH HARNESS
	Accessory 1		BLUE/RED		(+)		IGNITION SWITCH HARNESS
	Starter 1		RED		(+)		IGNITION SWITCH HARNESS
	Anti-Theft Type		UNIVERSAL IMMOBILIZER
	Anti-Theft Descript		THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
	Key Sense		BLUE/BLACK		(-)		IGNITION SWITCH HARNESS
	Tachometer		YELLOW/RED		(AC)		AT IGNITION COIL
	Speed Sense		VIOLET / YELLOW		(AC)		IN HARNESS IN PASSENGER KICKPANEL
	Parking Lights		GREEN		(+)		AT VEHICLE FUSE PANEL
	Brake Lights		GREEN / WHITE		(+)		AT SWITCH ABOVE BRAKE PEDAL
	Reverse Lights		RED / BLACK		(+)		AT VEHICLE FUSEBOX
	Horn		GREEN/ BLACK		(-)		IGNITION SWITCH HARNESS
	Modules
	WIRE		LOCATION
	Please select another category
	Doorlocks/Windows
	WIRE		COLOR		POLARITY		LOCATION
	Power Unlock		DARK BLUE		(-)		IN ORANGE PLUG AT VEHICLE FUSE PANEL
	PowerLock		DARK BLUE/WHITE		(-)		IN ORANGE PLUG AT VEHICLE FUSE PANEL

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Just make sure to turn OFF virtual tach if you are going tach-less and set crank time to .8 or 1.0 seconds... Dos you have a bit-writer...If not and are going to be installing alot of these units...Buy one...Makes programming features SOOOO much easier...for example...You can set run-time up to 60 minutes in 1 minute increments...Also turn off virtual tach and set crank time...etc...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

It's a VERY easy car. run a tach wire.A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Thanks guys!!! I thought it looked pretty straightforward but asking first is always a good idea.