push to start take over solution?

Home / the12volt's Install Bay / Car Security and Convenience / push to start take over solution? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

tianot

Copper - Posts: 155

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 20, 2010 at 9:16 PM / IP Logged

hi guys! im installing a compustar remote starter unit into a 2007 infiniti fx35 with a intelligent key with the turn knob and im using the ads-al bypass. my question is do i need to wire the take over solutions wiring diagram? if yes, what is the best solution diagram to use for a automatic transmission?

tianot

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: December 20, 2010 at 10:17 PM / IP Logged

That module should have you wiring a relay to interrupt a wire at the IntelliKey module, which will allow you to do a takeover (able to turn the know when you get in).

tianot

Copper - Posts: 155

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 21, 2010 at 1:31 PM / IP Logged

hey, so i dont need to do the take over solution wiring diagram for 2007 infiniti fx35. this is suv is a intelligent key with the turn knob not a push start button.

tianot

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 21, 2010 at 4:46 PM / IP Logged

Make sure the ADS-AL CA is flashed with the ADS AL(DL) Ni Ver 6.21 firmware. Follow the install guide.

No need to change from the Automated Take Over, it works fine. Just give the customer a copy of the last page in the install guide ( page 67). It explains the correct way to do it without causing any error lights / messages.

Soldering is fun!

tianot

Copper - Posts: 155

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 21, 2010 at 7:10 PM / IP Logged

thanks kreg!

so i dont need to do anything on the take over solution,i just follow the type 2 diagram and thats it.

is it eAsy to remove the lower dash cover of 2007 infiniti fx35? how about the lower cover of the steering wheel?

yhanks

tianot

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: December 21, 2010 at 8:47 PM / IP Logged

two screws (10 mm head?)for the lower dash cover if memory serves me. hood release handle bracket? six phillips head screws for lower column cover.

mark

tianot

Copper - Posts: 155

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 21, 2010 at 11:09 PM / IP Logged

hey guys,

in what programming procedure do i need to use to prgram the ads-al bypass if i have a intillegent key with the turn knob?

is it the basic programming or the push-start programming procedure?

thanks

tianot

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 22, 2010 at 5:31 AM / IP Logged

If it's like the the 2011 Nissan Rogue I did recently, isn't there an actual ignition key inside of the Intelli-Key FOB?

Soldering is fun!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 22, 2010 at 7:08 AM / IP Logged

the intellikey does use a key style knob in the ignition and if doesnt work you can remove the cover and use the metal key from the intellikey.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tianot

Copper - Posts: 155

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 22, 2010 at 8:40 AM / IP Logged

there is a metal key inside the key fob.

what programming procedure do i need to use? the push start programming or just the basic one?

thanks

tianot

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.