remote start, 01 explorer sport

Home / the12volt's Install Bay / Car Security and Convenience / remote start, 01 explorer sport (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: January 06, 2011 at 7:19 PM / IP Logged

Need to wire immobilizer to a Prestige APS901C Remote Start System

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: January 06, 2011 at 7:51 PM / IP Logged

Need more detail to offer assistance. You want to add an immobilizer? Meaning your car did not come with an immobilizer and you want to add more security to it?

Or... You want to add a bypass module to your AP901C? If this is what you are asking what bypass module do you have and what is the make/model/year of the vehicle in question?

Installer, IT support, and FFL. I need less hobbies.

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: January 07, 2011 at 7:57 AM / IP Logged

After further research. I will need a transponder bypass for a 2001 Ford Explorer. Any suggestions for said model of remote start.

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 07, 2011 at 8:17 AM / IP Logged

The DEI 1100F bypass module will work. Available "online" for around $13. No lost key, easy to program, will work with any remote starter and very reliable.

Soldering is fun!

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: January 07, 2011 at 11:31 PM / IP Logged

Thanks

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: January 16, 2011 at 12:33 PM / IP Logged

Need wiring info to install remote start in 01 ford explorer. Have questions about accessory connections. I only have one accessory wire coming from my remote start. Explorer has two accessory wires that are brown and one second accessory that is blk/grn. Can I just use relays to power the other wires?

jpadj22

Copper - Posts: 100

Joined: March 19, 2010

Location: Illinois, United States

Posted: January 17, 2011 at 11:38 AM / IP Logged

What remote start is it? U can get the wiring info from this site. U will need a relay to power up 2nd acc.

the12volt

Administrator - Posts: 3,955

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: January 17, 2011 at 3:32 PM / IP Logged

OP's topics merged.

remote start, 01 explorer sport -- posted image.

the12volt • Support the12volt.com

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: January 17, 2011 at 7:16 PM / IP Logged

Prestige APS901C DEI 1100f 01 Ford Explorer Sport Keyless entry Build date on vehicle 10/00 Having trouble disarming factory alarm. did not find drk grn/ purple wire in drivers kick panel or at CSM (pass kick panel) Found one at a deadend plug near CSM. When I try to do a remote start, I get three attempts with theft light flashing each time. Vehicle will start with remote and key in ignition. Do not think I am disarming factory alarm.

kreg357

Platinum - Posts: 7,783

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 17, 2011 at 7:36 PM / IP Logged

The factory alarm will only sound the horn. To see if your truck has a Factory Alarm, shut all the doors except the drivers door. Roll down the drivers door window. Lock the car with the drivers door lock button and close the drivers door. Wait a few minutes and reach in and open the drivers door with the inside handle. The alarm should not prevent the remote starter from starting the car, More likely that the bypass is not programmed properly.

Try a Factory Reset on the DEI 1100F. Then select and program the Installation Mode ( 2 blinks ). Then proceed with the actual Type 1 transponder programming.

Soldering is fun!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.