2010 toyota camry, adslaca, viper vss5000

My Camry does not have Smart Key, and I use a 40 bit key. I just installed this system, but I am missing some things. I have read all of the great stuff on here and I think I will try to give a new topic a shot. This will be informative for most, and I will keep posting as I get this alarm 100% working. Hopefully, folks with this combo will be able to use this for their installs. Working: Horn, parking lights, Viper alarm items Partially Working: Car tries to start but immediately dies (ADSLACA not doing it's job) Not Working: Locks, Trunk, Fully functional start, and pretty much everything else :-\ The problem seems to lie in the ADSLACA. I have programmed it, every thing seems great, but after the entire procedure, the light goes out and will not come back on. I have not played with it much, but I wanted to post my progress and see who else can pitch in! So Far: H1                                                                                                               RED / White          Aux trunk release          TO          ADSALCA          RED / white          trunk release input                                                             Red          12v constant input          TO          12v Con          Black          IGN Harness                                                             Brown          Siren          TO          Siren                                                                                 Empty                                                             Black          Chassis Ground          TO          Chassis Ground                                                                                 Violet          Door input          TO          n/u                                                                                 Blue          Trunk instant trigger input          TO          ADSALCA yellow/red trunk status output                                                              Green          Door input          TO          ADSALCA          yellow/black          door status output                                                             BLACK/ White          Domelight output          TO          n/u                                                                                 WHITE/ Blue          Remote Start activation input          TO          n/u                                                                                 White          Parking light output 30          TO          CamSE          black          parking lights (fuse box)                                                             Orange          Ground when armed output          TO          n/u                                                                                                                                                                                               H3                                                             BLACK/ White          Neutral safety input          TO          Chassis ground                                                                                 Violet/White          tach input          TO          ADSALCA          PURPLE / white          Tach (AC) output                                                             Brown          Brake shut down input          TO          ADSALCA          orange          Brake output                                                             Gray          Hood pin switch NO/NC input          TO          ADSALCA          yellow          hood status output                                                             Blue/White          2nd remote start status / Defogger (prgm) output          TO          RELAYS connected to rear defog    green in kick <<NOT CONNECTED YET>> ?????                                                                                                                                                                           Door Unlock/Lock                                                                                                               Blue          Unlock (-) Lock (+)          TO          ADSALCA          blue/black          unlock input                                                             Green          Unlock (+) Lock (-)          TO          ADSALCA          GREEN/ black          lock input                                                                                                                                                                           H2                                                                                                               L GREEN/ black          OEM disarm output          TO          n/u                                                                                 L GREEN / WHITE          OEM arm output          TO          n/u                                                                                 WHITE/ violet          Aux 1 output          TO          n/u                                                                                 Violet/black          Aux 2 output          TO          n/u                                                                                 WHITE/ black          Aux 3 output          TO          n/u                                                                                 Light blue          2nd unlock output          TO          ADSALCA          blue/black          unlock input                                                             Gray/Black          wait to start input          TO          n/u                                                                                                                                              H4                                                             Brown          horn honk output          TO          CamSE          white          Fuse box                                                             ORANGE / Black    (-) 200mA Channel 6 Output    TO    n/u                                                                                                                          Door Lock                                                             Green    (-) lock (+) unlock    TO     ADSALCA    GREEN/ Black    lock input                                                             Blue    (+) unlock (-) lock    TO    ADLALCA    Blue/Black    unlock input                                                                                                                                                                           Relay Satellite                                                             Pink          IGN 1 output          TO          CamSE IGN 1 / ADSALCA          Yellow / Pink          IGN Harness / IGN sense input                                                             RED / White          12v constant fused 30a input TO          CamSE 12v Con          Black          IGN Harness                                                             Orange          Accessory output          TO          CamSE Acc 1          White          IGN Harness                                                             Violet          Starter output (car side)          TO          CamSE Start 1          Blue          IGN Harness                                                             Green          Starter output (key side)          TO          CamSE Start 1          Blue          IGN Harness                                                             <<I SPLICED INTO BOTH VIOLET AND GREEN BUT DID NOT CUT EITHER>>                                                             Red      12v constant fused 30a input (for IGN1 relay)          TO          CamSE 12v Con          Black          IGN Harness                                                             Pink/White          (default IGN2, prgm)          TO          CamSE IGN 2          Pink          IGN Harness                                                                                                                          Relay Satellite out                                                                                                               Blue          RS status output          TO          ADSALCA          blue/white          ground while running   &   CamSE Keysense    Blue    IGN Harness ?????                                                             Orange          RS Accessory output          TO          n/u                                                                                 Violet          RS starter output          TO          (STDP relay)    GamSE IGN Harness     Gray   Starter 2   <<NOT CONNECTED YET!>> ?????                                                             Pink          RS IGN1 output          TO          n/u                                                                                                                                                                                               ADS LA CA                                                                                                               blue/white          ground while running          TO          Viper RS out          Blue          RS status output   &   CamSE Keysense    Blue    IGN Harness ?????                                                             black          Chassis ground          TO          Chassis ground                                                                                 red          12v constant 30amp fused          TO          CamSE 12v con          Black          IGN Harness                                                             GREEN/ black          lock input          TO          Viper Door lock/unlock          Green          Unlock (+) Lock (-)                                                             blue/black          unlock input          TO          Viper Door lock/unlock          Blue          Unlock (-) Lock (+)                                                             RED / white          trunk release input          TO          Viper H1          RED / White          Aux trunk release                                                             green          e-brake output          TO          n/u                                                                           PURPLE / white          Tach (AC) output          TO          Viper RS in          Violet/White          tach input                                                             yellow/black          door status output          TO          Viper H1          Green          Door input                                                             yellow/red          trunk status output          TO          Viper H1          Blue          Trunk instant trigger input                                                             yellow          hood status output          TO          Viper RS in          Gray          Hood pin switch NO/NC input                                                             BROWN / red          CANh          TO          CamSE          6/black          OBDII                                                             BROWN / yellow          CANl          TO          CamSE          14/white          OBDII                                                             ORANGE / black          Chassis ground (OEM hood pin installed)          TO          Chassis ground                                                                                 orange          Brake output          TO          Viper RS in          Brown          Brake shut down input                                                             Pink          IGN input (+)          TO          CamSE IGN 1          Yellow          IGN 1 Harness                                                             GREEN/ red          code          TO          CamSE          4/brown          Key IGN Imm                                                             gray/red          txct          TO          CamSE          5/red          Key IGN Imm                                                            

are you using D2d or wire to wire if d2d did you flash the module with dbi protocol or is it ads(will not work with the viper) you will know the firmware is right if it begins with the DBI- instead of the ADS- if wire to wire was used then it does not matter to make sure that it is the bypass and nothing else have you tried to disconnect the ground while running wire(status Wire) from the bypass and just put the key in the cylinder to see if it will start

also try not to copy and past from a rich text editor like word or open office or write. if that is a must try to copy it to notepad first then copy it again and paste here

monty_77 wrote: are you using D2d or wire to wire if d2d did you flash the module with dbi protocol or is it ads(will not work with the viper) you will know the firmware is right if it begins with the DBI- instead of the ADS- if wire to wire was used then it does not matter to make sure that it is the bypass and nothing else have you tried to disconnect the ground while running wire(status Wire) from the bypass and just put the key in the cylinder to see if it will start

No D2D as you can see in my connections above. I hard wired everything that I could. I had it flashed with the Camry image, but like you said, it shouldn't matter. I did try it with the key in the ignition, and it still tried to start and shut right back off. I am thinking it has something to do with the RS output blue wire not being hooked to the Starter 2 wire in the Camry. My main concern is that the light is not flashing green on the bypass module. The door locks aren't working, and I guess I just thought that the ADSALCA would take care of all of the work for me (though I'm still not sure how it could unlock the doors without any connections directly to the door wires). I suppose it could... and I just don't understand it.

i will look into it further and the door locks are controlled by the bypass on the canbus network of the vehicle(More or less it just tell the computer to unlock the doors and computer does it) here this will be much easier to read H1        RED / White Aux trunk release TO ADSALCA RED / white trunk release input Red 12v constant input TO 12v Con Black IGN Harness Brown Siren TO Siren           Empty Black      Chassis Ground     TO     Chassis Ground           Violet     Door input      TO     n/u           Blue     Trunk instant trigger input     TO     ADSALCA yellow/red trunk status output Green     Door input      TO     ADSALCA     yellow/black     door status output BLACK/ White     Domelight output     TO     n/u           WHITE/ Blue     Remote Start activation input     TO     n/u           White     Parking light output 30     TO     CamSE     black     parking lights (fuse box) Orange     Ground when armed output     TO     n/u                      H3 BLACK/ White     Neutral safety input     TO     Chassis ground           Violet/White     tach input     TO     ADSALCA     PURPLE / white     Tach (AC) output Brown     Brake shut down input     TO     ADSALCA     orange     Brake output Gray     Hood pin switch NO/NC input     TO     ADSALCA     yellow     hood status output Blue/White     2nd remote start status / Defogger (prgm) output     TO     RELAYS connected to rear defog green in kick <<NOT CONNECTED YET>> ?????            Door Unlock/Lock           Blue     Unlock (-) Lock (+)     TO     ADSALCA     blue/black     unlock input Green     Unlock (+) Lock (-)     TO     ADSALCA     GREEN/ black     lock input            H2           L GREEN/ black     OEM disarm output     TO     n/u           L GREEN / WHITE     OEM arm output     TO     n/u           WHITE/ violet     Aux 1 output     TO     n/u           Violet/black     Aux 2 output     TO     n/u           WHITE/ black     Aux 3 output     TO     n/u           Light blue     2nd unlock output     TO     ADSALCA     blue/black     unlock input Gray/Black     wait to start input     TO     n/u           H4 Brown     horn honk output     TO     CamSE     white     Fuse box ORANGE / Black    (-) 200mA Channel 6 Output    TO    n/u Door Lock Green    (-) lock (+) unlock    TO     ADSALCA    GREEN/ Black    lock input Blue    (+) unlock (-) lock    TO    ADLALCA    Blue/Black    unlock input            Relay Satellite Pink     IGN 1 output      TO     CamSE IGN 1 / ADSALCA     Yellow / Pink     IGN Harness / IGN sense input RED / White     12v constant fused 30a input TO     CamSE 12v Con     Black     IGN Harness Orange     Accessory output     TO     CamSE Acc 1     White     IGN Harness Violet     Starter output (car side)     TO     CamSE Start 1     Blue     IGN Harness Green     Starter output (key side)     TO     CamSE Start 1     Blue     IGN Harness <<I SPLICED INTO BOTH VIOLET AND GREEN BUT DID NOT CUT EITHER>> Red    12v constant fused 30a input (for IGN1 relay)     TO     CamSE 12v Con     Black     IGN Harness Pink/White     (default IGN2, prgm)     TO     CamSE IGN 2     Pink     IGN Harness Relay Satellite out           Blue      RS status output     TO     ADSALCA     blue/white     ground while running   &   CamSE Keysense    Blue    IGN Harness ????? Orange     RS Accessory output     TO     n/u           Violet     RS starter output     TO     (STDP relay)    GamSE IGN Harness     Gray   Starter 2   <<NOT CONNECTED YET!>> ????? Pink     RS IGN1 output     TO     n/u                      ADS LA CA           blue/white     ground while running     TO     Viper RS out     Blue      RS status output   &   CamSE Keysense    Blue    IGN Harness ????? black     Chassis ground     TO     Chassis ground           red      12v constant 30amp fused     TO     CamSE 12v con     Black     IGN Harness GREEN/ black     lock input     TO     Viper Door lock/unlock     Green     Unlock (+) Lock (-) blue/black     unlock input     TO     Viper Door lock/unlock     Blue     Unlock (-) Lock (+) RED / white     trunk release input     TO     Viper H1     RED / White     Aux trunk release green      e-brake output     TO     n/u        PURPLE / white     Tach (AC) output     TO     Viper RS in     Violet/White     tach input yellow/black     door status output     TO     Viper H1     Green     Door input yellow/red     trunk status output     TO     Viper H1     Blue     Trunk instant trigger input yellow     hood status output     TO     Viper RS in     Gray     Hood pin switch NO/NC input BROWN / red     CANh     TO     CamSE     6/black     OBDII BROWN / yellow     CANl     TO     CamSE     14/white     OBDII ORANGE / black     Chassis ground (OEM hood pin installed)     TO     Chassis ground           orange     Brake output     TO     Viper RS in     Brown     Brake shut down input Pink     IGN input (+)     TO     CamSE IGN 1     Yellow     IGN 1 Harness GREEN/ red     code     TO     CamSE     4/brown     Key IGN Imm gray/red     txct     TO     CamSE     5/red     Key IGN Imm

you will have to connect the second starter wire on this car on the blue starter wire you do not have to hook up the green one if you are not cutting the factory blue starter wire make sure you diode isolate the keysense and bypass from each other. that could be causing problems for the programing when you stick the key in the ignition it trigger the bypass to turn on also on the bypass you did select the wire to wire programing just to make sure

if you do not have it diode isolated, after isolating it, i would reset the bypass and redo the programing. make sure you have the starter 2 wire hooked up too

Not sure if the '10 is the same as the 9 but i know for the 09 i did i needed to program the idatalink module with both keys that came with the car, put the first key in turn to on remove key and put second key in (leave in off position) should get a green light if everything is installed properly. As long as you are wired from the remote start to the bypass module using the wire to wire method and not D2D you will be okMike

delco_installer wrote: Not sure if the '10 is the same as the 9 but i know for the 09 i did i needed to program the idatalink module with both keys that came with the car, put the first key in turn to on remove key and put second key in (leave in off position) should get a green light if everything is installed properly. As long as you are wired from the remote start to the bypass module using the wire to wire method and not D2D you will be ok

Why did you have to program both keys? Strange. I got it all working and I only programmed with one key. I'll have to try the other key to see if everything is ok.

Monty, thanks for the help! I got it working, and all I had to do was connect the 2nd Starter violet wire to a relay that powers the 2nd Starter of the car (Gray). After I hooked up that wire, the Bypass Module took the program (FINALLY). I couldn't get it to take a program, but this time I got the green solid light. I immediately tried it, and it worked like a charm. The final connections pasted below make absolutely everything work perfect. Door locks, trunk, remote start, parking lights, horn, brake, tach, everything. I hope this helps someone in the future. H1                                                                                 RED / White     Aux trunk release     TO     ADSALCA     RED / white     trunk release input                                                        Red      12v constant input     TO     12v Con     Black     IGN Harness                                                        Brown     Siren     TO     Siren                                                                  Empty                                                        Black      Chassis Ground     TO     Chassis Ground                                                                  Violet     Door input      TO     n/u                                                                  Blue     Trunk instant trigger input     TO     ADSALCA yellow/red trunk status output                                                         Green     Door input      TO     ADSALCA     yellow/black     door status output                                                        BLACK/ White     Domelight output     TO     n/u                                                                  WHITE/ Blue     Remote Start activation input     TO     n/u                                                                  White     Parking light output 30     TO     CamSE     black     parking lights (fuse box)                                                        Orange     Ground when armed output     TO     n/u                                                                                                                                                   H3                                                        BLACK/ White     Neutral safety input     TO     Chassis ground                                                                  Violet/White     tach input     TO     ADSALCA     PURPLE / white     Tach (AC) output                                                        Brown     Brake shut down input     TO     ADSALCA     orange     Brake output                                                        Gray     Hood pin switch NO/NC input     TO     ADSALCA     yellow     hood status output                                                        Blue/White     2nd remote start status / Defogger (prgm) output     TO     RELAYS connected to rear defog  green in kick                                                                                                                                         Door Unlock/Lock                                                                                 Blue     Unlock (-) Lock (+)     TO     ADSALCA     blue/black     unlock input                                                        Green     Unlock (+) Lock (-)     TO     ADSALCA     GREEN/ black     lock input                                                                                                                                         H2                                                                                 L GREEN/ black     OEM disarm output     TO     n/u                                                                  L GREEN / WHITE     OEM arm output     TO     n/u                                                                  WHITE/ violet     Aux 1 output     TO     n/u                                                                  Violet/black     Aux 2 output     TO     n/u                                                                  WHITE/ black     Aux 3 output     TO     n/u                                                                  Light blue     2nd unlock output     TO     ADSALCA     blue/black     unlock input                                                        Gray/Black     wait to start input     TO     n/u                                                                                                                          H4                                                        Brown     horn honk output     TO     CamSE     white     Fuse box                                                        ORANGE / Black    (-) 200mA Channel 6 Output    TO    n/u                                                                                                                Door Lock                                                        Green    (-) lock (+) unlock    TO     ADSALCA    GREEN/ Black    lock input                                                        Blue    (+) unlock (-) lock    TO    ADLALCA    Blue/Black    unlock input                                                                                                                                         Relay Satellite                                                        Pink     IGN 1 output      TO     CamSE IGN 1 / ADSALCA     Yellow / Pink     IGN Harness / IGN sense input                                                        RED / White     12v constant fused 30a input TO     CamSE 12v Con     Black     IGN Harness                                                        Orange     Accessory output     TO     CamSE Acc 1     White     IGN Harness                                                        Violet     Starter output (car side)     TO     CamSE Start 1     Blue     IGN Harness                                                        Green     Starter output (key side)     TO     CamSE Start 1     Blue     IGN Harness                                                        <<I SPLICED INTO BOTH VIOLET AND GREEN BUT DID NOT CUT EITHER>>                                                        Red    12v constant fused 30a input (for IGN1 relay)     TO     CamSE 12v Con     Black     IGN Harness                                                        Pink/White     (default IGN2, prgm)     TO     CamSE IGN 2     Pink     IGN Harness                                                                                                                Relay Satellite out                                                                                 Blue      RS status output     TO     ADSALCA     blue/white     ground while running                                                         Orange     RS Accessory output     TO     n/u                                                                  Violet     RS starter output     TO     (STDP relay)    GamSE IGN Harness     Gray   Starter 2                                                         Pink     RS IGN1 output     TO     n/u                                                                                                                                                   ADS LA CA                                                                                 blue/white     ground while running     TO     Viper RS out     Blue      RS status output                                                        black     Chassis ground     TO     Chassis ground                                                                  red      12v constant 30amp fused     TO     CamSE 12v con     Black     IGN Harness                                                        GREEN/ black     lock input     TO     Viper Door lock/unlock     Green     Unlock (+) Lock (-)                                                        blue/black     unlock input     TO     Viper Door lock/unlock     Blue     Unlock (-) Lock (+)                                                        RED / white     trunk release input     TO     Viper H1     RED / White     Aux trunk release                                                        green      e-brake output     TO     n/u                                                               PURPLE / white     Tach (AC) output     TO     Viper RS in     Violet/White     tach input                                                        yellow/black     door status output     TO     Viper H1     Green     Door input                                                        yellow/red     trunk status output     TO     Viper H1     Blue     Trunk instant trigger input                                                        yellow     hood status output     TO     Viper RS in     Gray     Hood pin switch NO/NC input                                                        BROWN / red     CANh     TO     CamSE     6/black     OBDII                                                        BROWN / yellow     CANl     TO     CamSE     14/white     OBDII                                                        ORANGE / black     Chassis ground (OEM hood pin installed)     TO     Chassis ground                                                                  orange     Brake output     TO     Viper RS in     Brown     Brake shut down input                                                        Pink     IGN input (+)     TO     CamSE IGN 1     Yellow     IGN 1 Harness                                                        GREEN/ red     code     TO     CamSE     4/brown     Key IGN Imm                                                        gray/red     txct     TO     CamSE     5/red     Key IGN Imm