99 camaro, viper 5901

Home / the12volt's Install Bay / Car Security and Convenience / 99 camaro, viper 5901 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: January 19, 2011 at 10:18 AM / IP Logged

Got an 99 camaro and installing an viper 5901 need help with these harnesses

H2/1- LHT GRN/BLK (-) 200mA OEM ALARM DISARM OUTPUT

H2/2- ORG/BLK (-) 200mA AUX 4 OUTPUT

H2/3- GRN/WHT (-) 200mA OEM ALARM ARM OUTPUT

H2/4- VIOL/BLK (-) 200mA AUX 2 OUTPUT

H2/5- WHT/BLK (-) 200mA AUX 3 OUTPUT

H2/6- WHT/VIOL (-) 200mA AUX 1 OUTPUT

H2/7- GRY/BLK (-) 200mA DIESEL WAIT TO START (dont think we need this one LOL)

H2/8- BRW/BLK (-) 200mA HORN HONK OUTPUT

H2/9- VIOL/WHT TACHOMETER INPUT

H2/10- DRK BLU (-) 200mA STATUS OUTPUT

H2/11- PINK/WHT (-) 200mA FLEX RELAY CONTROL OUTPUT

H2/12- ORG (-) 200mA ACC OUTPUT

H2/13- PRPL (-) 200mA STARTER OUTPUT

H2/14- PINK (-) 200mA IGNITION 1 OUTPUT

H2/15- GRY (-) 200mA HOOD PIN INPUT (N/C N/O)

H2/16- BLU/WHT (-) 200mA 2ND STATUS/REAR DEFFOGER OUTPUT

H2/17- BRW (+) BRAKE SHUTDOWN INPUT

H2/18- BLK/WHT (-) NEUTRAL SAFETY INPUT

H3/1 pink, to cars BLACK / YELLOW.

H3/2 RED / white, to 12V constant.

H3/3 orange, to cars yellow.

H3/4 violet, starter side of cars cut BLACK/ white lead.

H3/5 green, key side of cars cut BLACK/ white lead.

H3/6 red, to 12V constant.

H3/7 pink/white, to cars WHITE/ black and program as 2nd acc.

H3/8 pink/black, not needed.

H3/9 RED / black to 12V constant.

Search for other posts by legendarysouls

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 22, 2011 at 8:50 AM / IP Logged

Look on this site under vehicle wiring, frankly if you need help with that many wires, take it to a pro and pay to have them do it for you.

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: May 02, 2011 at 12:35 PM / IP Logged

Hey

got a 99 camaro z82

got everything to work on the alarm side of the viper 5901

remote start info:

bypass the passlock II with restior and tested and works

everything is wired as per this fourm wiring diagram and TESTED ....only thing i didnt use is the TACH Wire at all ( dead not attached )

car goes to turn on but no crank.....lights up like everything started and does this cycles 3 times

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: May 02, 2011 at 5:20 PM / IP Logged

Do you get any parking light flashes?? If so how many? Is the car Auto or manual? Toggle switch plugged in and ON ?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: May 03, 2011 at 10:10 AM / IP Logged

so i got the start to work

NOW new problem......when i put the car in DRIVE OR REVERSE 1,2,3..... The odometer, gas gauage and temp stop working like i lose power to gauages...happens with remote sstart or key start

99 camaro Auto

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 03, 2011 at 11:04 AM / IP Logged

Check all your fuses AND your internal connections plugs etc. Looks like an instrument panel feed to me. Do these units work when vehicle is in park or neutral?

Smokeman 1 why are we bothering? He isn't listening.

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: May 03, 2011 at 11:21 AM / IP Logged

Auto .. swtich is ON..dont get any flashes....unit powers on via remote and key ......all seems fine untill car is put in to gear then car loses power to ceratin gauages. YES THEy only work when in park or netural :)

going to check fuses and wiring now

THNAKS

please help sorry

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: May 05, 2011 at 7:46 AM / IP Logged

FUSES are good

kreg357

Platinum - Posts: 7,783

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: May 05, 2011 at 8:51 AM / IP Logged

Strange problem. Not sure if this will help but it is a place to check.

Per your H3 harness connections: Did you use a DMM to locate and verify the ignition wires?

On some cars, it is best to connect right at the ignition switch.

Here is info for 1999 Camaro:

Signal Color/Polarity Location Source

12 VOLT CONSTANT RED (+) @ IGNITION SWITCH HARNESS Bulldog, Audiovox, DEI

STARTER YELLOW (+) @ IGNITION SWITCH HARNESS Bulldog, Audiovox, DEI

IGNITION 1 PINK (+) @ IGNITION SWITCH HARNESS Bulldog, Audiovox, DEI

IGNITION 2 Brown (+) @ IGNITION SWITCH HARNESS shown by Audiovox only

ACCESSORY 1 ORANGE (+) @ IGNITION SWITCH HARNESS Bulldog, Audiovox, DEI

Soldering is fun!

legendarysouls

Member - Posts: 9

Joined: January 19, 2011

Posted: May 05, 2011 at 8:56 AM / IP Logged

Yea i sure its the right wiring harness, tested that... only wierd thing is the problem happens if i use the key or remote start which makes me think i knocked something lose ....but i looked every fuse is good and all wiring looks intact.

thanks

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.