lights stay on toyota rs3000

Home / the12volt's Install Bay / Car Security and Convenience / lights stay on toyota rs3000 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lfoster200

Member - Posts: 2

Joined: August 23, 2011

Location: Arizona, United States

Posted: August 23, 2011 at 10:01 PM / IP Logged

I have a 2000 Tundra that when I arm the security system the parking lights flash twice, but then stay on until I start the engine. Disarm will not turn them off, nor turning the key on. The engine has to be started.

Any suggestions will be appreciated. Thanks

Back to Top

ropuma

Copper - Posts: 102

Joined: February 16, 2010

Location: Illinois, United States

Posted: August 24, 2011 at 3:56 PM / IP Logged

Do you have a factory or aftermarket alarm?

Back to Top

lfoster200

Member - Posts: 2

Joined: August 23, 2011

Location: Arizona, United States

Posted: August 24, 2011 at 5:18 PM / IP Logged

Thanks for the response. It is the factory RS3000 system. I suspect a relay, but cannot find a wiring diagram, or installation instructions anywhere. Any help will be greatly appreciated.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

lights stay on toyota rs3000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.