Power Window Kit, Wiring Diagram Lost

Home / the12volt's Install Bay / Car Security and Convenience / Power Window Kit, Wiring Diagram Lost (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 11, 2011 at 9:22 PM / IP Logged

I lost my power window conversion kit wiring diagram. How hard would it be to do this job without it? Almost have a bachelors in electronics engineering....and the closest thing i see to a logic circuit is the switch. everything else is wires, and a fuse on the power lead.

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 11, 2011 at 9:22 PM / IP Logged

did i say hello? :)

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 11, 2011 at 9:50 PM / IP Logged

Does the wire with the fuse have the connectors on it to allow it to be connected to 2 different terminals on the switch?

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 11, 2011 at 10:03 PM / IP Logged

i am an idiot wrote:

Does the wire with the fuse have the connectors on it to allow it to be connected to 2 different terminals on the switch?

just one length of wire with a fuse in between, that connects to a wiring harness that connects to the switches (1 power/lock and 4 window)on the armrest.

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 11, 2011 at 10:22 PM / IP Logged

How many connections on each window switch?

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 12, 2011 at 4:32 AM / IP Logged

from what i can see there's a red +, 2 black -, and one for up and down. or is that what the two negatives are for?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 12, 2011 at 5:10 AM / IP Logged

Stop! Go no further, this is factory and who knows what's in the module, Get that diagram, we can't guess.

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 12, 2011 at 6:27 AM / IP Logged

i could test the leads with a logic analyser and see what they do...

laserbeak43

Copper - Posts: 48

Joined: November 08, 2010

Location: Maryland, United States

Posted: November 14, 2011 at 6:35 PM / IP Logged

havent tried the logic analyser yet,

but i did get the diagram... even though it doesnt tell you what kinds of diodes to use.

any suggestions?

Power Window Kit, Wiring Diagram Lost -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 14, 2011 at 6:59 PM / IP Logged

This is a bog standard window system type "A" negative at rest. Same wiring as most vehicles without comfort control or one touch.

What diodes? There aren't any in that diagram, incidentally what logic probe? All you would need for this set-up is a 12v test light.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.