cm5000, 2011 nissan xterra

Home / the12volt's Install Bay / Car Security and Convenience / cm5000, 2011 nissan xterra (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

Next Page > < Prev Topic Next Topic >

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 7:01 PM / IP Logged

I am installing a CM5000 in a 2011 Nissan Xterra and i am getting the error-"key on in ignition". I've checked my wiring as well as the 2nd starter connections, and installed relay on the IPDM. The vehicle would not crank thought the module is trying to start it. Any help is appreciated.

Back to Top

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: February 04, 2012 at 7:11 PM / IP Logged

Is error 3 flashes then 1 flash?

If so key on or ignition error is same as not programmed tach

Either program tach or change option 2-10

If it tries to crank you hooked up the relay wrong

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 7:50 PM / IP Logged

thanks, i just did the reset, programmed for tach, still no crank. anything else i might have missed or the module needs to be updated?

Back to Top

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: February 04, 2012 at 7:54 PM / IP Logged

No crank at all? Does it turn on the ignition? What bypass did you use?

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 8:11 PM / IP Logged

no crank at all. ads-al(dl)-ni2 . wire to wire. module clicking when attempting.

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 8:12 PM / IP Logged

i can start with the ignition key but not with the remote starter

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 9:08 PM / IP Logged

when i put the key to ignition and remote start, it will start. does this have to do with the 2nd ignition?

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 9:10 PM / IP Logged

or 2nd starter ...

Back to Top

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: February 04, 2012 at 9:27 PM / IP Logged

is the key just in the ignition (not turned) or is the key turned as well. Did you connect both starter and both accessory wires (only showing 1 ignition wire)? Did you use relays on both wires?

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Back to Top

newdriver

Member - Posts: 11

Joined: April 19, 2008

Posted: February 04, 2012 at 9:47 PM / IP Logged

thanks. the key to the on position and it starts. i connected both the stater and 2nd starter wires and only connected 1 acc wire. do i need to connect the 2nd acc wire?

Back to Top

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.