2004 silverado, viper 5704, 530t

Hey guys< Im installing  aviper 5704 on a 2004 Chevy silverado with manual transmissionand im trying to bypass the clutch safety switch. Any body know whats the best way that i can acomplish that?pvc

If the starter wire passes through the clutch saftey switch you will need to connect the H3 VIOLET starter wire after the saftey switch.

Alright thanks !! Lurch!pvc

Im installing A  viper 5704 on a 04 Silverado and want to know what polarity + or - should i put it in? i am seeing  tha at the driver kick panel they are + brown wire and at the bcm their - gray/black wire. Also do i need to diode isolate the door triggers on this model it is a two door regular cab?

pvc

Choose which ever Parking Light wire is most convenient for you, then set the Vipers' jumper/fuse

accordingly.  ( Using the (-) Parking Light wire will draw less current thru the Viper.)

Yes, you must diode isolate the door triggers into one input for the Viper.

Soldering is fun!

Alrigth!! thanks kregg for quick response! You rock!pvc

Hey guys,I installed a viper 5704 with a db all on a 2004 chevy silverado.I am having trouble with the dball followed steps for programing all the way till the red light stays on red ready for the vehicle to be turned on but when i turn on the vehicle theres is no change on the light ,it supposed to go green for three secs and then shuts off but it stays solid red all the time!Can some one tell me what could it be?Thanks1pvc

Not a whole lot to connect with that install if you are going D2D.  Just the Data connection to the OBD2 Pin 2 wire.  My first thoughts would be - Is the correct firmware ( 401.GM4 ) flashed on the DB-ALL module?Soldering is fun!

Yea thats what im thinking also,when i bought it I had it flashed but dont remember what firmwire im gonna refladoodie and what happens!thanks kregg!pvc

Reflash it and see!sorrypvc