clifford concept 650mk2 plugs

Home / the12volt's Install Bay / Car Security and Convenience / clifford concept 650mk2 plugs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

elmo2002

Member - Posts: 2

Joined: October 22, 2013

Location: United Kingdom

Posted: November 17, 2013 at 10:21 AM / IP Logged

Hi, can anyone help, I have been having problems with my concept 650. On investigation today I have found that all of the pins in the 2 white plugs on the loom side have pulled out. I have a install manual that tell you pin positions but am unsure how it is viewing the plugs.

Any help would be appreciated as 2 days of trying to sort this and I'm stumped!

Thanks

Back to Top

elmo2002

Member - Posts: 2

Joined: October 22, 2013

Location: United Kingdom

Posted: November 17, 2013 at 11:46 AM / IP Logged

Update

I now have all the wires back in and I believe they are in the correct place (confirmation would be good still)

However the new problem is neither the fobs or the valet code will disarm the alarm!

Any suggestion?????

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford concept 650mk2 plugs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.