installing keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / installing keyless entry (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 22, 2003 at 6:59 AM / IP Logged

Here's the deal...my alarm has lock/unlock capabilities,but was not hooked up during original install. Anyway, Ineed to know what I need and how to's. My car has power locks (when I push the tab to lock the drivers door it also locks the pass. side, but I have to hold up on the handle for the pass. to lock). Thanks in advance.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2003 at 8:25 AM / IP Logged

what is the yr make and model of car?????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jrcaraudiofreak

Member - Posts: 1

Joined: May 20, 2003

Location: United States

Posted: May 22, 2003 at 9:36 AM / IP Logged

David,

Could you tell me the wiring for a 97 Grand Am so I can do my keyless entry? Is it 3, 4, 5 positive or negative and would you be able to tell me which wire is which and color, etc. Thanks alot! please e-mail it too jrmcgrath2001@hotmail.com

Search for other posts by jrcaraudiofreak

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 22, 2003 at 3:20 PM / IP Logged

My car is a '93 MX6. The alarm is an older Chapman module.

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 22, 2003 at 3:21 PM / IP Logged

That's a mazda if you didnt know....

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2003 at 3:24 PM / IP Logged

Power Lock ADD ACTUATOR ACTUATOR NEEDED IN DRIVER DOOR #204

Power Unlock ADD ACTUATOR ACTUATOR NEEDED IN DRIVER DOOR #204

#204- See Adding Actuator Door Lock Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 22, 2003 at 3:27 PM / IP Logged

so I just need to do drivers door? do I need any relays?

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 22, 2003 at 3:28 PM / IP Logged

so I just need to do drivers door?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2003 at 3:30 PM / IP Logged

yes im not sure what your outputs are coming from the alarm.

if you add a motor and you operate the drivers door, it will control the rest of them. you can use a DLS from omega with two relays. it makes it soooo much easier

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

dazed

Member - Posts: 22

Joined: September 24, 2002

Location: United States

Posted: May 23, 2003 at 7:03 AM / IP Logged

two outputs from the alarm say lock and unlock, but not wiring going to them. i assume that is where i need to

wire up. what is a DLS? door lock system? Thanks for the help.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.