2011 Ford Fiesta, Parking Lights and Locks

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Ford Fiesta, Parking Lights and Locks (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: February 17, 2015 at 9:07 AM / IP Logged

Some conflicting information on this car 2011 Ford Fiesta. Where is the best place to get the park lights and the locks. Some say single wire locks???? Any help would be great. Doing this car this week...Thanks

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 17, 2015 at 10:26 AM / IP Logged

parking lights:

Front: GREEN/ orange,BROWN / yellow (+) @ bcm 24pin BLUE PLUG

Rear: PURPLE / green,WHITE/ orange (+) @ bcm 24pin GREY PLUG

Negative headlight switch follow techdoc 1096

doorlocks bcm follow techdoc 1099

use the evo-all much easier

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: February 17, 2015 at 10:46 AM / IP Logged

Will have the EVO ALL tomorrow....lol

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 17, 2015 at 11:25 AM / IP Logged

We used DB-ALL but hard wired the locks.

Use FRD03 software, follow BUT from the alarm, use an aux linked to arm or factory arm to yellow/grey pin 6 grey plug C7, factory disarm to PURPLE / brown pin 19, same plug.

This will give you ignition lock/unlock if required but will deadlock the vehicle on arming the alarm and turn off the factory alarm at the same time.

No need to go into the driver's door if this car use key ignition.

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: February 17, 2015 at 9:45 PM / IP Logged

Does not show on Fortin site the Evo All does the locks on the Fiesta...has that changed?

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: February 17, 2015 at 9:46 PM / IP Logged

And does anyone have a link to the Tech Doc 1099?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 18, 2015 at 4:00 AM / IP Logged

Try looking at the plug I mentioned above for the wiring before worrying about 1099.

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: February 18, 2015 at 6:18 AM / IP Logged

OK...Thanks howie!!!!!!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 18, 2015 at 11:54 AM / IP Logged

fiesta.jpg

If you mod this for the EVO-ALL it should work!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 18, 2015 at 11:56 AM / IP Logged

Howie asked me to upload this

2011 Ford Fiesta, Parking Lights and Locks -- posted image.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.