Viper 4105V Transmitters Function Differently

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4105V Transmitters Function Differently

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

needabeer

Member - Posts: 13

Joined: January 20, 2006

Location: United States

Posted: December 06, 2015 at 6:07 PM / IP Logged

I just installed a Viper 4105V into my 2003 Honda Element using a PKALL. Everything works as it should except my transmitters. I have the 4105 programmed to honk on lock/unlock and RS to activate after two button presses. One transmitter does just that, the other unlock/locks with no honk and activates RS on one press. I reset the transmitters within the 4105 and reprogrammed only to have it function the same. Any ideas? Thank you.

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: December 07, 2015 at 11:29 AM / IP Logged

If you have a bit writer, you can change the remotes to act differently from each other. You may need to change the save to remote 0 instead of 1-4

Back to Top

needabeer

Member - Posts: 13

Joined: January 20, 2006

Location: United States

Posted: December 07, 2015 at 12:31 PM / IP Logged

I do have a bitwriter, so I will look into that. Thanks.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.