2003 Pontiac Sunfire remote starter install

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Pontiac Sunfire remote starter install

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

2003sunfire

Member - Posts: 3

Joined: January 02, 2016

Location: Connecticut, United States

Posted: January 02, 2016 at 4:45 PM / IP Logged

Hi All! First post here but have been a lurker for quite a while and finally joined. Putting a Code Alarm 4054 remote starter in my son's 2003 Pontiac Sunfire along with a PLJX bypass module for the Passlock 2. Got a question on the wire from the Code Alarm box that says to connect to IGNITION #2 wire which this car apparently does NOT have.

Is it OK to just tie into the IGNITION #1 wire along with the other wire that is already added to that wire? Thanks for any help.

Back to Top

chev104275

Gold - Posts: 1,427

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 02, 2016 at 6:20 PM / IP Logged

If you don't need the second ignition wire then Isolate the unused wire and don't connect it to anything.

If i Can't Install it I Don't need it Joe

Back to Top

lectricguy

Copper - Posts: 359

Joined: March 18, 2008

Location: Rhode Island, United States

Posted: January 02, 2016 at 6:28 PM / IP Logged

Follow what Chev said. Just use the Ignition 1 wire from the Code Alarm 4054. Connect to the car's ignition wire (Pink in the ignition harness). Just tape the Code Alarm 4054 Ignition 2 wire--no need to use it.

Lectric Guy

Back to Top

2003sunfire

Member - Posts: 3

Joined: January 02, 2016

Location: Connecticut, United States

Posted: January 03, 2016 at 7:41 AM / IP Logged

So what is the 2nd Ignition wire on the 4054 used for then? It will still function without it?

Back to Top

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 03, 2016 at 7:55 AM / IP Logged

The second ingition is used for different applications. It will function fine without it on your Sunfire

If i Can't Install it I Don't need it Joe

Back to Top

2003sunfire

Member - Posts: 3

Joined: January 02, 2016

Location: Connecticut, United States

Posted: January 03, 2016 at 12:59 PM / IP Logged

Finished up install today and everything works fine. Thanks!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.