Honda s2000 keyless entry won't work

Home / the12volt's Install Bay / Car Security and Convenience / Honda s2000 keyless entry won't work (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rmtphan

Member - Posts: 14

Joined: February 18, 2003

Location: United States

Posted: November 01, 2003 at 11:58 PM / IP Logged

I'm putting in a autopage 750-lcd alarm into my s2000 and everything work fine expect for the door lock. It wouldn't lock or unlock. I follow the diagram on techsoft and saw that the pol on the S2000 is a C. I don't understand what the mean but i guess that's why it isn't working. Do anybody know how to get it working? This is what I follow.

POWER LOCK|pink/black |C |keyless entry module *2 |

POWER UNLOCK|yel/grn & pnk/blu |C |keyless entry module *2 |

*2 The keyless entry module is located in the drivers kick behind the start button.

Back to Top

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: November 02, 2003 at 12:24 AM / IP Logged

That's the module. do you have a power door lock switch? I did one when it was the first release. On the keyless entry module there were two block wire slot. Those slot are one for lock and one for unlock. those were negative trigger. Insert a wire on it.

Good luck.

Back to Top

rmtphan

Member - Posts: 14

Joined: February 18, 2003

Location: United States

Posted: November 04, 2003 at 7:25 PM / IP Logged

10nesne1 wrote:

That's the module. do you have a power door lock switch? I did one when it was the first release. On the keyless entry module there were two block wire slot. Those slot are one for lock and one for unlock. those were negative trigger. Insert a wire on it.

Good luck.

the car has no power door lock switch. It's keyless entry. I try tapping into the wire that was given to me by techsoft but I couldn't get it to lock or unlock still. Where are the two block wire slot that you are refering to?

Back to Top

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: November 04, 2003 at 7:38 PM / IP Logged

well, if you know where the keyless entry module is then you should remove the 10mm screw and bring it down and you should be able to see there were two blank slot for wire. S2000 model 2000 to 2002 is the same. S2000 model 2003 might be a bite different.

Good luck

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Honda s2000 keyless entry won't work

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.