04 town and country

Got one coming in tomorrow for a remote start, is there anything out of the ordinary i should be aware of? I read that these have a new sentry key, which means the 555c is prolly not going to work, so what 'bout the 555u?   Is that still a possibility or is that going to be a pain? The cars are for a chrysler dealership so they can get the keys for cheap.

I just did an 02' last week, theyre not fun . they have 1 postitive starter wire and 1 negative starter wire that needs to see 180 ohms. negative trigger with a resistor for parking lights. more work than normal. have fun!!!!! heres all the info youll need. In the one i did, i got a blank key from howard keys and coded it and used it in a key box to bypass the transponder part. Audiovox Tech Support 505737 FaxBack ID: CHRYSLER TOWN & COUNTRY 2004 MINIVAN Security Color Polarity Location Battery LIGHT BLUE/RED (+) IGNITION SWITCH HARNESS Ignition 1 PINK/WHITE (+) IGNITION SWITCH HARNESS Starter 1 YELLOW (+) IGNITION SWITCH HARNESS All Door Trigger YELLOW/ORANGE (-) AT BCM 25 OF BK/GN LF Latch VIOLET (-) PIN 6 OF BLACK/ WHITE 34 PIN AT BCM RF Latch VIOLET/WHITE (-) PIN 7 OF BLACK/ WHITE 34 PIN AT BCM LR Latch VIOLET/GRAY (-) PIN 8 OF BLACK/ WHITE 34 PIN AT BCM RR Latch TAN/ORANGE (-) PIN 5 OF BLACK/ WHITE 34 PIN AT BCM Trunk Trigger VIOLET/ORANGE (-) PIN 29 OF BLACK/ WHITE 34 PIN AT BCM Hood Trigger VIOLET/LIGHT BLUE (-) PIN 30 OF BLACK/ WHITE 34 PIN AT BCM Alarm Disarm VIOLET/LIGHT BLUE (-) 1.5 K RESISTOR TO DISARM & UNLOCK Alarm Arm VIOLET/LIGHT BLUE (-) 2.0 K RESISTOR TO ARM & LOCK Parking Lights WHITE/ BROWN (-) @HDL SWTCH GRND,THROUGH 5.3K OHM RESISTOR - Note OR 2.1 OHM RESISTOR Remote Start Battery LIGHT BLUE/RED (+) IGNITION SWITCH HARNESS Ignition 1 PINK/WHITE (+) IGNITION SWITCH HARNESS Accessory 1 VIOLET/ORANGE (+) IGNITION SWITCH HARNESS "16G WIRE" Starter 1 YELLOW (+) IGNITION SWITCH HARNESS Starter 2 VIOLET/BROWN (-) IGNITION SWITCH HARNESS - Note MUST USE RELAY TO ENHANCE GROUND, DURING CRANK ONLY, WITH 180 OHM RESISTOR. IF YOU DO NOT HAVE 4 PIN AUXILARY HARNESS, ATTACH LT. BLUE IGNITION 3 TO 85, TAP OFF OF START WIRE TO 86, GROUND THE 180 OHM RESISTOR AND ATTACH TO 87, CUT THE VIOLET/BROWN Anti-Theft Descript TRANSPONDER Key Sense LIGHT BLUE (-) IGNITION SWITCH HARNESS Tachometer DARK BLUE/GREEN (AC) PIN 11 AT PCM LFT CORNER OF ENGINE COMP. Crankshaft Sensor BROWN / LIGHT BLUE (-) PIN 32 OF PCM LFT CORNER OF ENGINE COMP. Camshaft Sensor BLUE/GRAY (-) PIN 33 OF PCM LFT CORNER OF ENGINE COMP. Speed Sense DARK BLUE/ORANGE (AC) 66 OF PCM LFT CORNER OF ENG.COMP.2ND PLG Parking Lights WHITE/ BROWN (-) @HDL SWTCH GRND,THROUGH 5.3K OHM RESISTOR - Note OR 2.1 OHM RESISTOR Brake Lights WHITE/ TAN (+) AT BRAKE LIGHT SWITCH Reverse Lights WHITE/ LIGHT GREEN (+) PIN 9 OF BLACK/ GREEN 34 PIN AT BCM Horn DARK GREEN/ VIOLET (-) STEERING COLUMN HARNESS Doorlocks/Windows Power Unlock VIOLET/DARK GREEN (-) PIN 21 AT BCM 2.0K - Note USE 2KOHM RESISTOR TO UNLOCK THE DOORS DR. SIDE SLIDER USES A 4.7 OHM RESISTOR TO OPEN & CLOSE (NEG PULSE) PASS. SIDE SLIDER USES A 1.2 OHM RESISTOR TO OPEN & CLOSE (NEG PULSE) PowerLock VIOLET/DARK GREEN (-) PIN 21 AT BCM 5.3K - Note USE 5.6KOHM RESISTOR TO LOCK THE DOORS DR. SIDE SLIDER USES A 4.7 OHM RESISTOR TO OPEN & CLOSE (NEG PULSE) PASS. SIDE SLIDER USES A 1.2 OHM RESISTOR TO OPEN & CLOSE (NEG PULSE) Driver Mtr Unlock TAN/LIGHT GREEN (REV) PIN 28 OF BLACK/ GREEN 34 PIN AT BCM Driver Mtr Lock TAN/WHITE (REV) PIN 10 OF BLACK/ GREEN 34 PIN AT BCM Pas Mtr Unlock TAN/BROWN (REV) PIN 26 OF BLACK/ GREEN 34 PIN AT BCM LF Window Up ORANGE / LIGHT GREEN (+) LF Window Dn ORANGE / WHITE (+) AT DRIVERS SWITCH RF Window Up ORANGE / TAN (+) AT DRIVERS SWITCH RF Window Dn ORANGE / DARK GREEN (+) AT DRIVERS SWITCH LR Window Up ORANGE / DARK BLUE (+) AT DRIVERS SWITCH LR Window Dn ORANGE / LIGHT BLUE (+) AT DRIVERS SWITCH RR Window Up ORANGE / GRAY (+) AT DRIVERS SWITCH RR Window Dn GRAY/DARK GREEN (+) AT DRIVERS SWITCH Convenience LF Pk Lt Bulb WHITE/ BROWN (+) RF Pk Lt Bulb (+) WHITE/ ORANGEMike Battaglia

Specialized Car Audio

Bensenville IL 60106

The late model Chrysler minivans are as much of a pain in the ass as a remote start can be, but after you do a couple you get used to them. The main things are making sure to use relays for the parking lights and second starter, and running your power wire under the hood(the constant feed to the ignition switch is fused at 10A). Also, if the T&C has auto headlamps on the switch, make sure you use the relay to isolate the lights wire from the switch(i.e. cut the wire and hook 87a to the switch side, 30 to the BCM side, and 87 to 2100 ohms resistance to ground).

I think the reason godsegoizhuge is asking the question is because the 2004 is a redesign. Listing info from 02 is probably pointless. I haven't done one yet. I do have bypasses in stock for the 04 Chrysler keys, they can be bought at bypasskit.com Good luck with the vehicle, and let us know what you find. It might be similar in wiring to an 04 Durango or maybe even a Ram. Might want to compare the wiring to one of those, there are tech sheets available for those.

i just got off the phone with howard keys, and they do have keys available for the 2004 t/c. JWORM... i didnt list info from the 2004, the info listed is for the 2004, i just mentioned that i had worked on a 2002.Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

I found a bypass kit that will work, its from bypasskits.com. Now my question is this, i dropped the lower dash panel and there's what looks like an airbag of some sort. Anyone know how to get around this or should i just leave it be?

can someone help me out how i will wire in for the 2nd starter wire and also the parking lights? I got the resistors for it. I notice it says directfax 1082 for parking lights and directfax 1083 for remote start. Anyone actually have a copy of these two forms they can post or just give me step by step on how to wire these 2 wires up?