remote start problem

Home / the12volt's Install Bay / Car Security and Convenience / remote start problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

skizza502

Member - Posts: 3

Joined: February 10, 2004

Location: United States

Posted: February 27, 2004 at 9:00 PM / IP Logged

I need help... I've completed installation of a mannix remote / start alarm combo, on a 1998 chevy tahoe. The problem that I believe I'm having is with my passlock system. I've been through about 3 or 4 DEI 555L's, and countless hours, and can't quite get it right. The remote start worked Twice, and now nothing? The alarm dose its part and tries to start, and even works in turbo, but passlock wont let it remote start. Any 1have any suggestions?

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: February 27, 2004 at 9:50 PM / IP Logged

Assuming you have the RIGHT PASS 2 wires *(thin yellow) *(thin ORANGE / black)

And you have cut the yellow wire in half....attaching Yellow wire from 555L to yellow half that goes to Ignition switch......attaching BLACK / YELLOW to other half

And attaching Black wire from 555L to ORANGE / black

Red to + 12Volt Constant

Pink to Ignition 1 +

Make sure you have voltage upon Remote Start at Pink and Red

OR

I would try puting key in ignition and turn to ON and try Remote Start

If it starts Double check your wiring again

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 27, 2004 at 10:34 PM / IP Logged

Try a different module for bypass. I would use PLDATA for this vehicle.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

skizza502

Member - Posts: 3

Joined: February 10, 2004

Location: United States

Posted: February 27, 2004 at 11:13 PM / IP Logged

tried remote starting with key in run position nothing happens

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 27, 2004 at 11:18 PM / IP Logged

It's the bypass module & make sure that it is receiving a ground signal when remote starting. Test the ground out when running wire from the remote starter to ensure a proper (-) ground. Test the ground on the remote starter as well as this will affect the (-) output for this wire.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

skizza502

Member - Posts: 3

Joined: February 10, 2004

Location: United States

Posted: February 29, 2004 at 5:38 PM / IP Logged

Thanks for your help guys. I think the pldata will work best for me.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.