507 T Dip Switch Adjustment

What's w/ DEI's install / adjust instruction manual? I just received my 507T Motion/Tilt Sensor. On the sensor itself (bottom on the table w/ the mounting hole on the table): ON means - Dipswitch DOWN to the bottom. BUT on the instruction manual: Deep switch UP - away from the bottom is ON? Which one is correct? I know I could try it myself later on but I'm curious here at work trying to find out which one is the right way.. Instruction or the sensor itself. Thanks, David

Never mind... Big Dog posted it before: Try 3 degrees and medium motion . .. Don't forget that when facing the dipswitches, to flip dipswitch ON it must be in the DOWN position (opposite of a light switch in your home). . . So when dipswitch 1 is closer to PCBoard, the position is 1 degree, whereas away from PCBoard is 3 degrees. Same goes for other settings.