relay satellite

Home / the12volt's Install Bay / Car Security and Convenience / relay satellite (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: January 23, 2006 at 9:38 AM / IP Logged

What do the four smaller gauge wires connect to that's on the relay satellite of the 791xv. The colors are blue, orange, purple and pink. The wires looks to be either 18 or 20 gauge.

pss5075104

Copper - Posts: 144

Joined: February 09, 2005

Location: United States

Posted: January 23, 2006 at 9:45 AM / IP Logged

The blue is a status out put, orange is a acc wire, purple is a starter wire, and pink is an ing wire. they are small because they are used to trigger a relay to power the wire. only need them if the car has 3 ing wires or 2 acc wires like that.

MECP First Class Certified Installer.

Nothing is impossable, it's just more expensive.

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: January 23, 2006 at 10:02 AM / IP Logged

Thanks pss507510. I believe I have 2 acc not sure about the ign wires. I'll check. 98 Expedition.

blue = ?

orange = acc

purple = starter side wire

pink = ign

Is this correct? What wire do the blue connect to?

godblessdremil

Silver - Posts: 273

Joined: August 03, 2005

Location: United States

Posted: January 23, 2006 at 2:28 PM / IP Logged

the blue wire durring a remote start is ground. It is used to connect a bypass moduel to the remote start most of the time. It is the same wire as your blue/wht wire on the remote start harness.

Blue- Status(Ground When Remote Start)

Orange- Accessory

Purple-Starter Wire

Pink- Ignition

Search for other posts by godblessdremil

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: January 25, 2006 at 1:00 AM / IP Logged

So I connect the small gauge blue wire from the relay satellite to my 555F immobolizer along with the WHITE/ blue wire from the 12-pin connector?

Anothe question, do I have to connect the mutiplexed input(blue) from the 12-pin to anything? If so, what do I connect to?

godblessdremil

Silver - Posts: 273

Joined: August 03, 2005

Location: United States

Posted: January 25, 2006 at 1:07 AM / IP Logged

No the blue/wht wire in your remote start harness and on the 4 pin relay sat harness are the same thing. No you don't have too hook up that wire.

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: January 26, 2006 at 11:46 PM / IP Logged

OK I finally made all my connections (so I thought) and still nothing.

Here some wires that are not connected:

12pin plug

RED / white = (-)200mA channel 2 validity output

blue = trunk

BLACK/ wht = (-)200mA domelight output

orange = groung when armed output

7pin plug no wires connected. Look like I just realized my problem. If any of these wires have to be connected let me know to what they need to be connected to.

blue = (-)200mA status output

ORANGE / blk = 200mA anti-grind/ground when armed output

violet = (-)200mA starter trigger

org = (-)200mA acc trigger

pnk = (-)200mA ign trigger

yel = (+) ign input to remote start

pnk/wht = 200mA programmable ign/acc trigger

OK I really feel stupid now. Let me know what goes where anyway.

6pin plug no wires connected

stroked383z28

Member - Posts: 21

Joined: February 11, 2005

Posted: January 26, 2006 at 11:58 PM / IP Logged

You don't *need* any of the wires you have listed for the 12 pin plug. You need to connect the 7 pin ribbon harness from the brain to the relay pack. You won't need the 6 pin harness either.

stonecole

Copper - Posts: 50

Joined: October 30, 2005

Location: United States

Posted: January 27, 2006 at 12:08 AM / IP Logged

I'm sorry I do have the ribbon connected. I was just looking at the printout in the back of the book and thought they was talking about something else. Well so far everything seem to be right. But the alarm does nothing.

godblessdremil

Silver - Posts: 273

Joined: August 03, 2005

Location: United States

Posted: January 27, 2006 at 1:54 AM / IP Logged

Describe what ya mean by the alarm does nothing.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.