2001 monte carlo aftermarket security

Home / the12volt's Install Bay / Car Security and Convenience / 2001 monte carlo aftermarket security (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 25, 2006 at 10:52 PM / IP Logged

i ahve a 2001 monte carlo 3.4 v6 no onstar that i am wanting to put a aftermarket security system in along with remote start, i was hoping if it was possible to get a wiring guide along with a idea of the location of the wiring for the 2001 monte carlo. thank you

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 26, 2006 at 1:25 AM / IP Logged

http://www.directechs.com/directwire/wire_body.asp?action=select&yr=3284&product=Remote%20Start

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 26, 2006 at 5:54 PM / IP Logged

The drivers door trigger wire is blue. Blue/white will catch the passenger door. Use both wires and diode isolate each.

it what meaning do they have for this, like there is supposed to be a diode in each wire with teh chathode facing in what direction and thank you for the wiring diagram

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 26, 2006 at 5:59 PM / IP Logged

is it also possible to get this information if you dont mind at all thank you

DirectFax document 1076 for wiring information.

See DirectFax document 1600 for wiring information.

Lock and unlock use the same wire. Lock requires a

negative trigger with a 470 ohm resistor in-line.

Unlock is negative trigger. Must use relays.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 27, 2006 at 10:43 AM / IP Logged

For D.FAX 1600 all it says is to diode or relay isolate the parking light wire otherwise you will get a check engine error after remote starting. Have the diode inline of the (-) parking light output with the cathode band towards the BCM.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 27, 2006 at 5:12 PM / IP Logged

awesome thank you! any information on document 1076 for like the trunk

CHEVROLET, MONTE CARLO, 2001, Trunk/Hatch Pin

The BCM is located above the brake pedal. It is a plastic box with three plugs that face the firewall.

Have to also diode isolate from the BCM to prevent false alarms. Refer to DirectFax document 1076 for wiring information.

thank you!

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 27, 2006 at 6:25 PM / IP Logged

CHEVROLET, MONTE CARLO, 2001, Factory Alarm Disarm

The BCM is located above the brake pedal. It is a plastic box with three plugs that face the firewall.

the color is light green do i need to cut that wire? or no?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 27, 2006 at 10:21 PM / IP Logged

Just use the Negative Door Trigger Diode Isolation diagram for the trunk as well. The OEM disarm wire you have to tap into with the OEM disarm output of the alarm/remote starter.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 27, 2006 at 10:30 PM / IP Logged

i just want to thank you for helping me out with this! this some really great information! thank you!

xenonmatrix

Member - Posts: 43

Joined: March 25, 2006

Posted: March 27, 2006 at 11:05 PM / IP Logged

Do you have any idea where this wire would be located? i notice there the same color but possible different locations any ideas? thank you

Brake Wire

white

brake switch

Tachometer

white

ignition coil

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.