the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

module for window roll up and down?


Post ReplyPost New Topic
< Prev Topic Next Topic >
turbo_boss 
Member - Posts: 42
Member spacespace
Joined: December 02, 2006
Location: Panama
Posted: December 27, 2006 at 8:28 PM / IP Logged  

Guys, I want to add to my door (driver side) Auto window down and Auto window up.  Is there is availabe in the market a module that can do this?  Usually I know that the available window modules are for two windows but both roll down of both roll up.

What I want to do is conect the window control module only to the drivers window motor. When I just touch the window switch down  for one seg, it will auto down and when I touch the window switch up for one seg it will auto up.

I am looking for a window control module that do one window roll up and roll down and it will activate with momentary pulse. Do any body knows of a windo control module model that do this? Can you give me the brand, part number, etc

Thx for your help,

Isaac

mobilecustoms 
Silver - Posts: 397
Silver spacespace
Joined: November 04, 2005
Posted: December 27, 2006 at 9:11 PM / IP Logged  
you can get a dei 530t it will do auto up and down for two windows along with roll up/down with remote. for a sedan, you need two modules.
turbo_boss 
Member - Posts: 42
Member spacespace
Joined: December 02, 2006
Location: Panama
Posted: December 28, 2006 at 5:12 PM / IP Logged  
Guys, I got a window switch from a Lexus LX470 from a junk jard. The Lexus LX470 comes factory with auto up/down on the four windows on the driver side. For example I draw one switch so you can undertand. As you can see on the diagram it has 1 pin that activate the auto UP and 1 pin for auto down.

This switch work the following way. If you only want to roll down the window a little you just push it lightly but if you want to make it to go auto down you just push it harder and you will fill like a click and the window will auto down. It work the same way for the up.

I going to intall this switch on my car in order that it have auto up/down. I going to order a DEI 530T window module for this.

Please, check the diagram I have draw in order that you can let me know if it going to work the way I want. I want to have the avility to roll down/up the window a little and also have the avility to auto down/up.

Check and you will see I have change the black and vilolet wires that initialy goes to ground but I will hook them to the motor wires. What I dont have clear yet is if the Black wire goes with the Green or Blue or the Vilotet goes with the Blue or Green

Let me know what you think and if it going to work :-) I have not order yet the DEI 530T

THX,

Isaac

module for window roll up and down? -- posted image.

turbo_boss 
Member - Posts: 42
Member spacespace
Joined: December 02, 2006
Location: Panama
Posted: December 28, 2006 at 6:20 PM / IP Logged  

Guys, have any of you has open a DEI 530T module to see what is inside?  Do you know how many relays are built in?

I need to know this in order to see if I can make it work like my post

https://www.the12volt.com/installbay/forum_posts.asp?tid=87945&PN=1

THX,

Isaac

turbo_boss 
Member - Posts: 42
Member spacespace
Joined: December 02, 2006
Location: Panama
Posted: December 28, 2006 at 6:28 PM / IP Logged  
I am pretty sure it need to have 4 relays built in. 2 relays for each window.  So I will need to open it to separated the ground on each relay so it work the way I want it.
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: December 28, 2006 at 6:35 PM / IP Logged  
Your idea won't work for various reasons. The biggest reason....if you just hit the switch partially down for a split second...the window will still go all the way down.
Using the original switch in the car...do you realize you can still lower your window only a few inches at a time with the 530T installed? You don't have to have the windows go all the way up or all the way down everytime you hit the switch.
Without actually opening a 530T, I will say 4 relays: left UP, left DOWN, right UP, right DOWN.
turbo_boss 
Member - Posts: 42
Member spacespace
Joined: December 02, 2006
Location: Panama
Posted: December 28, 2006 at 9:53 PM / IP Logged  

OK, do you guys know were exactly on the Lexus GX 470 or LX 470 is the window auto up/down factory module is located?

My car is a Toyota Land Cruiser Prado. This car is exactly the same as the Lexus GX 470 but with less features (it just have auto down for the driver window ONLY) I want to add Auto up and thats why I am thinking about the DEI 530T.

Could it be possible that the  Lexus GX 470 window auto up/down factory module is build inside the switches that goes on the drivers door.   Maybe I can get this complete window switches and intall it on my car and solve my problem.

THX,

Isaac

JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: December 28, 2006 at 10:15 PM / IP Logged  
Just get a 530T and you will have 1-touch up and down for both front windows. Get another one...and you can do the rear doors. You are making this way too complicated.
sk8er666 
Member - Posts: 9
Member spacespace
Joined: December 26, 2006
Location: Canada
Posted: December 28, 2006 at 10:33 PM / IP Logged  

you can also goto a electrical wholesaler and buy relay's with a 12 volt coil N/O type. You will need one relay per window and a aux output of control modul. most units have a AUX neg out rated really low a few milli amps so for this type of system

module for window roll up and down? -- posted image.

Master Electrician
sk8er666 
Member - Posts: 9
Member spacespace
Joined: December 26, 2006
Location: Canada
Posted: December 28, 2006 at 10:46 PM / IP Logged  
you might need to add a timer relay in there for to hold the contacts on for the time it takes your windows ti roll down wich would need to be hooked up in seires with the -neg output from AUX i can re - draw if you want.
Master Electrician
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer