clifford matrix 10.5x installer's guide

I'm not sure if this is the right place to post this but i'm trying to download the guide for the matrix 10.5x at this location: https://www.the12volt.com/installbay/file.asp?ID=551 but it doesn't let me. am I doing something wrong? I have downloaded the manual for the 10.5 but I need the manual for the 10.5x version of this alarm. the only difference in the link is the ID which is 550 and not 551. can anyone help? thanks!watch wut u do...

No, you're not doing anything wrong. The file is MIA and has been removed from the database. Hopefully one of our members will add it again. the12volt • Support the12volt.com

thanks for the reply. I found the guide myself somewhere else and uploaded it to the site.watch wut u do...

Thanks Gen6Civic, it's been added. the12volt • Support the12volt.com

https://www.the12volt.com/installbay/file.asp?ID=651  the12volt • Support the12volt.com

after looking at the guide, i DO have a question about the module. where is the piezo sensor located? does it come with one in the package? i'm looking at the wiring diagram and i see a place for sensor 2 and sensor 3. based on this guide, it doesn't seem to come with a steering wheel sensor like other alarms. p.s. the reason why i'm asking is because i've had to take my car to an installer but they did a bad job of rewiring and i noticed a sensor that wasn't plugged in and it may have been from the old alarm i had before. any help would be appreciated. :)watch wut u do...