compustar cm300 trouble

the alram is a cm3000 sorry for the typo

thank you i will try this

ok i have the caar chirping and it unlocks the dors now but when i try to lock the doors it chirps 3 times in a row and they dont lock.should i try to reset the system or can you actually reset the box? the remote start still isnt working either. im thinking bout taking it to an authorized dealer on my next day off and having them take a look at it.

if i recall correctly the three chirps and not locking is indicating that you have an open zone(ie a door pin or something is up) now when you try to operate the starter do any of the parking lights flash? if so then I would put my money on the hood pin being the problem(either looses or faulty). I think that 10 flashes is hood pin error(or maybe 5 check the install manual if you have it) also is it is a standard then it could be something to do with the arming sequence of the starter. another potential issue is that you have on of your power fuses blown on the unit(hence preventing your starter to crank but the alarm works) or your unit has forgotten or was never "taught" tach and therefore is not starting( i think this is the 5 p light flash) unfortunately if it is anymore then a loose hood pin or the way in which you are trying to arm the starter then your best bet may be going to a "professional installer" cause there are many possibilities as to the issue and they will have the tools to diagnose it.

i talked to compustar directy today thank yall for the advice. the prolem lies within the truck trigger from what the technician was saying

With the Honda's you have to have all doors closed before the doors will lock.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA