the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 pt cruiser convertible


Post ReplyPost New Topic
< Prev Topic Next Topic >
crooozin 
Member - Posts: 1
Member spacespace
Joined: September 14, 2008
Location: Oregon, United States
Posted: September 14, 2008 at 10:11 PM / IP Logged  

Hi forum. First post.

I am having a hard time finding wiring diagrams and colors for my 2007 PT Cruiser convertible that actually match what I have. The ones posted here and elsewhere for non-convertibles don't seem to match up. For instance, my rr speakers are yellow/white stripe and GREEN/ black stripe- not listed that way anywhere I've seen so far, spent all day on this. At wits end. Can you help?

I'm looking for any and all diagrams, specifically starter 1/2, acc, ign, door/windows, radio/stereo, and for the top. Thank you in advance.

Regards,

C

ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: October 07, 2008 at 3:13 PM / IP Logged  

I hope this helps you out.

STARTER

PINK/LIGHT BLUE (+)

@ IGNITION HARNESS

  
 STARTER 2 PURPLE / BROWN (-) See NOTE *1 @ IGNITION HARNESS,

IGNITION 1

 PINK/WHITE (+)  @ IGNITION HARNESS  
    
    
 ACCESSORY /HEATER BLOWER 1 Uses the PURPLE / BROWN Starter #2 wire, See NOTE *2  @ IGNITION HARNESS,   
     
    
    
 PARKING LIGHTS ( + ) WHITE/ PURPLE (+)  IN DRIVERS KICK PANEL, HARNESS to REAR of VEHICLE   
 POWER LOCK LIGHT GREEN/ DARK GREEN (1-Wire Door Lock System) See NOTE *3

IN DRIVERS KICK PANEL or INSTRUMENT CLUSTER, Connector 2, Pin 18,

 
 POWER UNLOCK Same wire   
 LOCK MOTOR WIRE TAN/DARK BLUE (+)  IN DRIVERS KICK PANEL   
 DOOR TRIGGER See NOTE *4  IN EACH KICK PANEL or INSTRUMENT CLUSTER, Connector 2  
 DOMELIGHT SUPERVISION YELLOW/WHITE (+), Requires Relay  IN DRIVERS KICK PANEL   
 TRUNK RELEASE TAN/LIGHT GREEN (-) to TAN/DARK GREEN (-) See NOTE *5, Requires Relay  IN DRIVERS KICK PANEL   
    
 HORN DARK GREEN/ PURPLE (-)  @ HORN SWITCH   
 TACH ANY wire NOT DARK GREEN/ ORANGE  @ ANY FUEL-INJECTOR   
    
 BRAKE DARK GREEN / WHITE (+)  @ SWITCH ABOVE BRAKE PEDAL   
 FACTORY ALARM DISARM  DISARMS with FACTORY REMOTE ONLY!!     
 ANTI-THEFT CHRYSLERS SENTRY TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module and Extra Ignition Key  @ IGNITION SWITCH TUMBLER   
NOTES

NOTE *1 The STARTER #2 wire requires a (-) Negative thru a 180 Ohm resistor, this connection will also require a Relay to connect.

NOTE *2 The ACCESSORY wire Requires a (-)Negative thru a 610 Ohm resistor, this Accessory wire is the STARTER #2 wire and will also require an extra Relay.
NOTE*3 This vehicle uses a 1-Wire Door Locking System, the LOCK requires a (-) Negative thru a 1000 Ohm Resistor and the UNLOCK requires a (-) Negative thru a 250 Ohm resistor, depending on the unit some will also require 2 relays.
NOTE *4 The DRIVERS DOOR is a TAN (-) to PURPLE (-) in Pin 3, the PASSENGER DOOR is a TAN/RED (-) to PURPLE / WHITE (-) in Pin 11. The DRIVERS REAR DOOR is a TAN/ORANGE (-) to PURPLE / GRAY (-) in Pin 5. The PASSENGER REAR DOOR is a TAN / YELLOW (-) to PURPLE / YELLOW (-) in Pin 6. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE.

NOTE *5 On CONVERTIBLE's the TRUNK RELEASE is at the Switch in the Glove box, on Wagon's test this wire while opening the hatch from the handle on the rear hatch, the TRUNK/HATCH Release Motor wire is a TAN / YELLOW (+) in the Drivers Kick Panel.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer