the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

please help!

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / please help! (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
joey12volt 
Member - Posts: 10
Member spacespace
Joined: April 01, 2003
Location: United States
Posted: May 01, 2003 at 9:56 PM / IP Logged  
i bought the cable for the cva 1000 video input.. now i get the navigation screen and only see video for a second when i press v. sel.   what am i doing wrong?? i grounded the ebrake wire. what else!??!!?!?!??!!?!?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2003 at 10:12 PM / IP Logged  
Did you go through the proper sequence of the hand brake/e-brake ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
joey12volt 
Member - Posts: 10
Member spacespace
Joined: April 01, 2003
Location: United States
Posted: May 03, 2003 at 10:42 PM / IP Logged  

i am trying to bypass the ebrake circuit..

do you know if the 1000 and the 1005 have the same way of bypassing the ebrake?  i have a demo board chip for the 1005 and i would like to know if it would work for the 1000.

i guess my biggest problem is that i see video for a second then it goes to navigation system not connected...

thanks!

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 04, 2003 at 9:47 PM / IP Logged  

The 1000 did not have the video output that the 1005 has. As far as I know the 1000 was not meant for video input unless you modified the M-bus cable to support the video signal.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer