2011 mazda 3 dball problems

No it should hold the settings, as this type of bypass can only be programmed twice and has to be sent to the factory to be reset.

Sweet Thanks a bunch!! What state you in Lurch228

I would also have to say I have had great luck with the DB-ALL as of late.   Only carry 3 bypasses in the shop now.    DB-ALL   FL-CAN and 556U

vipercon99 wrote: I'll bet the brain insn't bad.   I can't remember is this model of remote start manual transmission capable?  If so all of the new vipers come default manual transmission mode.   Check that and change to automatic if needed.   Most DEI stuff is Menu 3 Option 1

The Responder One is not MTS enabled and only has 2 menues not 3!

lucasoil4u wrote: Sweet Thanks a bunch!! What state you in Lurch228

The mitten state.

The remote start works I just cant get into any programming functions. The Responder one is a base line brain with upgraded remotes. My bitwriter wont even talk to it.

If your bitwriter won't talk too it then you need to update the bitwriter to the newest version Which last I knew was 2.7, but there are some listings for a 2.9 upgrade. As far as the valet programming it should program if your are folling the steps correctly. And when you say upgraded remotes what model of remote are you using with the responder one.

Thats all it is from DEI. They use a cheap brain with the better remotes. I have 2.7 and it wont talk to it.

Have you tried pulling the power from the viper Aka the heavy guage plug to see if it will comunicate with the bitwriter then.