1999 jeep cherokee, alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 1999 jeep cherokee, alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 18, 2006 at 8:54 PM / IP Logged

Hello Everyone,

Quick question, I'm going to install an autopage 860 & a 530t on a 1999 jeep cherokee sport classic and I believe it has b type locks. Which type of locks are the b type neg or pos? I need to know what type of window system is on the jeep a,b, or c. If anybody has a wiring diagram that would help and be greatly appreciated. Thanks in advance

electronics

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: September 18, 2006 at 9:15 PM / IP Logged

DEI lists the locks as negative trigger but require relays (they evidentally require more than the 200ma output from the DEI brains).

Windows are Type A.

Hope this helps.

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 18, 2006 at 11:04 PM / IP Logged

Thanks for the info on that. Does anyone have the wiring diagram for this year of jeep?

electronics

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 18, 2006 at 11:22 PM / IP Logged

Check here for your wiring needs

Here is your vehicle.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 18, 2006 at 11:29 PM / IP Logged

Thank you again for the wiring info.

electronics

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 27, 2006 at 10:52 PM / IP Logged

Hello Everyone,

Quick question, I 'm going to hook up (2) 530t to a 1999 jeep cherokee sport so all 4 windows go up and down. In order to to get the 1 touch on all 4 windows can I go in the master switch in drivers door or do I have to wire into each door to get the 1 touch up and down? This will be running off autopage 860. Thank you in advance.

electronics

shaggy12volt

Copper - Posts: 164

Joined: July 16, 2002

Location: Ohio, United States

Posted: September 27, 2006 at 11:07 PM / IP Logged

LF Window up/dn	lt. blu - white	A	drivers door switch
RF Window up/dn	brn/wht - pur/wht	A	drivers kick panel
LR Window up/dn	blu/wht - RED / blk	A	drivers kick panel
RR Window up/dn	gry/blk - grn/wht	A	drivers kick panel

i belive you are going to have to use all the wires

The Shagmaster

1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"

1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER

Installing for over 18 years Looking for empolyment NOW send PM for resum

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 27, 2006 at 11:18 PM / IP Logged

So I can go in the kick panel to get the 1 touch on all 4 windows?

electronics

shaggy12volt

Copper - Posts: 164

Joined: July 16, 2002

Location: Ohio, United States

Posted: September 27, 2006 at 11:51 PM / IP Logged

ok i just relized i think of what your trying to do you want to use the one touch at all the window

look like your going to have to go to all the doors to do that in between the switch and the motor wires in the doors for the one touch. you are going to have to extend the wires to reach and run them thru the door boots. but thats only if you want the one touch dont forget to program the 530's for this.

The Shagmaster

1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"

1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER

Installing for over 18 years Looking for empolyment NOW send PM for resum

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 29, 2006 at 12:33 AM / IP Logged

Shaggy, all 530T's have 1-touch, you can't turn it off.

If you get the wires in each door, you will have 1-touch at each door, and at the drivers door for all 4 doors. Most work required.

If you get the wires in the drivers kick, you will have 1-touch for all the windows....but only at the drivers switch.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.