1999 jeep cherokee, alarm/remote start

Get two relays, connect your parking light wire from your alarm to 86 on both relays. Connect a ground wire to 85 on both relays. Connect a 12v fused to 87 on both relays. Then connect your jeeps parking light circuit to 30 on one relay. And connect the reverse light circuit to 30 on the 2nd relay.

ok, thank you very very much.  Have a good one!electronics

Can anyone tell me what color is the back up light wire is & it's location on a 99 jeep cherokee classic?electronics

Hey everyone, I'm working on a 99 jeep cherokee classic putting a rs 860 and can't find the tach.  I have two print out on the wiring.  One said gray at the coil and I checked several grays at the coil and general area.  Then I have another print out saying gray at the pcm black plug on drivers side fender and that one was not it.  Can anyone guide me in this area.  Thank you in advance.electronics

Got the back up light wire still need to find the tach wire. electronics

I can't believe no one can help me on the tach wire.electronics

1999 Jeep Cherokee Alarm Information the12volt • Support the12volt.com

I have this print out and the gray at the coil is not right.  I went to the pcm black plug on fender well gray wire, still no dice.  I went to the injectors, still no correct reading.  Trying to find out is there some place else I can check?electronics

usually you can use the opposite of common wire at any injector

I'm not understandind thatelectronics