the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Trailblazer GMDLBP troubles


Post ReplyPost New Topic
< Prev Topic Next Topic >
kdawg25 
Member - Posts: 13
Member spacespace
Joined: April 19, 2004
Posted: February 05, 2005 at 10:00 PM / IP Logged  
Well....picked up a new GMDLBP ver H2.S5 which appears to be the newest model and am still having troubles.
With the new module in, I can get it to start but it runs for a few seconds then dies. It's acting like the bypass isn't doing it's job? Have the GWR hooked to a relay to help(it didn't) and tried straight to ground(same result).
Also, this new one doesn't unlock the doors.
----press lock-sends lock pulse
----press unlock-sends lock pulse again ??????
----tried my old module, it locks and unlocks fine but doesn't start vehicle.
2 modules that are different versions giving completely different results........at least it starts with the new one, but the locks don't work right.....This doesn't make sense at all.
Anyone have an idea?
kiteman 
Copper - Posts: 98
Copper spacespace
Joined: January 14, 2004
Location: United States
Posted: February 05, 2005 at 11:07 PM / IP Logged  
      Some mods need a double pulse unlock to work the locks, is that one of them????
kdawg25 
Member - Posts: 13
Member spacespace
Joined: April 19, 2004
Posted: February 06, 2005 at 5:59 AM / IP Logged  
I don't think so.....but that wouldn't explain why the old one works the locks fine but the new one doesn't. I reprogrammed each to the same setting and nothing.
johnnydi77 
Copper - Posts: 54
Copper spacespace
Joined: May 17, 2004
Location: United States
Posted: February 11, 2005 at 8:50 PM / IP Logged  

Make sure you program that module properly.  It is type 1 first of all and you should program it for one pulse to unlock all the doors.  Another thing.  Does it have factory keyless??

John J. DiStefano Jr.
kdawg25 
Member - Posts: 13
Member spacespace
Joined: April 19, 2004
Posted: February 13, 2005 at 5:46 PM / IP Logged  
It's programed to type one. I set the option for locks to unlock all doors. It is just weird. The one module will unlock doors fine and won't start. The other will only lock and start the truck for a few seconds. It isn't a problem with programming the module, because it is doing that. But isn't working right.
Thinking about tossing both and going with 2 separate modules.....PLDATA and the other door lock mod.
This really isn't making any sense.
delphidoc 
Copper - Posts: 53
Copper spacespace
Joined: June 13, 2004
Posted: February 15, 2005 at 4:19 PM / IP Logged  
The engine will die after remote starting if the GMDL-BP's brown wire is not attached to the alarm's second status wire.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 15, 2005 at 5:18 PM / IP Logged  

delphidoc wrote:
< language=>postamble(); The engine will die after remote starting if the GMDL-BP's brown wire is not attached to the alarm's second status wire.

He attached it through a relay triggered by the GOWR wire ( which is the status wire ). I've had the same problem with a 2004 Sierra that I put a GMDLBP module on where the truck wouldn't start but the doors locks would work, but it would also set off the OEM security when you tried to unlock the doors. Still waiting for the customer to come back to me to finish off the installation but I'm going with two separate modules for this truck ( GMBP & the MULTIDL )

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
5150azn 
Silver - Posts: 584
Silver spacespace
Joined: June 21, 2004
Location: United States
Posted: February 15, 2005 at 6:39 PM / IP Logged  
Velocity Motors wrote:

delphidoc wrote:
< language=>postamble();</> The engine will die after remote starting if the GMDL-BP's brown wire is not attached to the alarm's second status wire.

He attached it through a relay triggered by the GOWR wire ( which is the status wire ). I've had the same problem with a 2004 Sierra that I put a GMDLBP module on where the truck wouldn't start but the doors locks would work, but it would also set off the OEM security when you tried to unlock the doors. Still waiting for the customer to come back to me to finish off the installation but I'm going with two separate modules for this truck ( GMBP & the MULTIDL )

And this is why I'd like to compile info on bypass systems... Ya gotta admit sometimes you just can't get things to work. Now why would they make something that doesn't work?
Tell the Snap-On guy I'm not here!
kdawg25 
Member - Posts: 13
Member spacespace
Joined: April 19, 2004
Posted: February 17, 2005 at 5:56 PM / IP Logged  
figured I'm not the only one with problems with this module.....lookes like I'll be putting in the PLDATA and probably multidl
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer