2007 civic remote start with pkh34

Home / the12volt's Install Bay / Car Security and Convenience / 2007 civic remote start with pkh34 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 21, 2007 at 5:40 PM / IP Logged

Ok car is 07 civic Si. Remote start is a compustar 2w900fmas. Attempting to use thePKH34 but I don't know how to wire it. It says to use the 7 pin plug and wire it up the colors don't match. The paperwork does not include wiring for the 06 and 07 civics. I just followed the pinouts and that didn't work. Then I messed around it said it was programmed but nothing. I can only get my remote start to work without the bypass with the key in the switch. Do I need to hook the keysense up to something here or not. Also the bypass unit comes with 2 sets of directions, both of which have me lost. A Install A "type C" and a Install B "type D." What ones to follow. Please help.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 21, 2007 at 5:43 PM / IP Logged

Where is the data wire?

The unit says the green plug is the one to use and it is a 7 pin. Well the green plug on my car is a 6 pin with only 3 wires. Now there is a white plug with 7 wires and that did not work.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 21, 2007 at 8:22 PM / IP Logged

You will be using INSTALL "B" aka Type D.

Honda Civic 2007 Transponder pinout.

7 Pin WHITE Connection. if you see a 6 pin harness with 3 wires, that is the wrong connector.

Pin 2 - Ignition (Yellow)

Pin 3 - Data (Light Green)

*How To Wire PKH34*

Wire RED - to 12volt constant @ ignition harness

Wire BLACK - Ground wire to chassis.

Wire BROWN - to status output from compustar module.

Wire VIOLET - tap into the Pin 3 (light green) @ the 7 pin WHITE connector on the transponer ring.

take 1 minute of your time and solder the VIOLET (DATA). a loose connection is not reliable at all.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 22, 2007 at 11:34 AM / IP Logged

Ok wired up and it still won't work. Only works with a key in the ignition. Is there something I need to hook my keysense wire up too?

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: December 22, 2007 at 12:31 PM / IP Logged

You don't need keysense wired up.

Had u reprogrammed the module after u got it wired up ? If not, do a module reset first.

To reset, press & hold button & plug in module, Led comes on, When led goes off, release button, module is reset.
To program, turn key to ignition on, led goes on.
After led turns off, module is now programmed.
remove key from ignition & try remote start.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 22, 2007 at 12:41 PM / IP Logged

Wire RED - to 12volt constant @ ignition harness

Wire BLACK - Ground wire to chassis.

Wire BROWN - to status output from compustar module.
Wire VIOLET - tap into the Pin 3 (light green) @ the 7 pin WHITE connector on the transponer ring.

That one is key......

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 22, 2007 at 5:16 PM / IP Logged

I got it wired up right. I'll try to reset it and see what happens.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 22, 2007 at 7:53 PM / IP Logged

Ok I reset it twice and still it won't start unless something is in the ignition. I am about to go to walmart and buy a blank key to leave in it.

xxajohnsonxx

Member - Posts: 14

Joined: December 19, 2007

Location: New York, United States

Posted: December 22, 2007 at 8:24 PM / IP Logged

do u have an extra key to the car? like a grey valet key or something? Becuase if you do there is a way to do it without the module. Its super easy, did it yesterday myself on this '07 civic at my job.

Trey99ek

Copper - Posts: 93

Joined: February 13, 2005

Location: United States

Posted: December 22, 2007 at 8:46 PM / IP Logged

I do, but it is not a valet key. And I don't want to leave that in the car. Care to explain?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.