2007 tiburon, parking lights, horn

need to know how to hook the parking lights up and factory horn

alarm is carvox 2300a this is what it says about the lights

it posted before i was done typing

pin2: brown:light 1 output (+) connecttheleftparkinglights of the vehicle

pin3: brown: light 2 output (+/-) out putis 7A (+) and 250ma (-) the light 2 switch (+/-) is on main bord the default is (+) output

I did an 08 recently and it said I needed two wires and I actually didn't. all that means is that it's a separate wire for left and right side lights. so if it does actually need them then you'll have to use a pair of diodes to split the wire to power both circuits.

the horn is very straight forward on that car, just hook it up.

ok on the horn didnt know if i needed a relay or not

the wiring diagram for my car says i need 2 relays ( NOTE *2 this vehicle has 2 PARKING LIGHT wires, to connect will require 2 extra Relays Part #R30-H) do i need the relays and if so how do i hook them up 

change the default (+) parklight output to (-) and use the blue/orange wire at the headlight switch. it turns on all the lights with only that single negative triggered wire.

will do i will let you know how it turns out